FaultCodes.org
P0342ChryslerIgnition & Misfire SystemTechnical Reference· Updated: Nov 22, 2026

Chrysler P0342 Fault Code: Camshaft Position Sensor A Bank 1 Low Input

Chrysler P0342 (Ignition & Misfire System): Camshaft Position Sensor A Bank 1 Low Input.

Quick AnswerHigh — Service Soon

Chrysler fault code P0342 indicates Camshaft Position Sensor A Bank 1 Low Input. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $162–$702.

Safe to Operate?
No — Risk of Damage
DIY Difficulty
Moderate (Intermediate)
System
Ignition & Misfire System
Professional Repair
$162 – $702

What This Fault Code Means

Manufacturer-specific Chrysler diagnostic trouble code P0342: Camshaft Position Sensor A Bank 1 Low Input.

Common Symptoms

  • Warning indicator or active diagnostic code P0342
  • Irregular behavior in Ignition & Misfire System

Most Likely Root Causes

  • Faulty sensor or actuator in Ignition & Misfire System
  • Damaged, corroded, or loose wiring harness connector

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside P0342.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Ignition & Misfire System.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside P0342?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Ignition & Misfire System.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Ignition & Misfire System.
  5. 5Clear fault memory and run a verification cycle to confirm P0342 does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$57 – $295
Professional Repair (Parts + Labor)$162 – $702

Frequently Asked Questions

Is it safe to keep operating with fault code P0342?

Avoid prolonged operation until inspected to prevent secondary component damage.

How much does it cost to repair P0342?

DIY replacement parts average $57–$295, while professional service averages $162–$702.

Will resetting P0342 fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

P0342 fault code meaningP0342 repair costhow to fix P0342

Manufacturer & Technical Reference

Chrysler Technical Reference (Ignition & Misfire System)

Related Fault Codes

Auto & OBD-II →
Chrysler P0342 Fault Code: Camshaft Position Sensor… — Fixes & Cost | FaultCodes.org