FaultCodes.org

Bosch / Siemens Fault Codes & Error Guide

5 indexed Bosch / Siemens fault codes in Home Appliances with plain-English causes, safety ratings, and repair cost ranges.

5 codes indexed
Quick Answer

Our Bosch / Siemens index covers 5 fault codes in Home Appliances, led by high-frequency lookups like E18, E15, E09, E24. Of these, 1 carry high or critical urgency ratings requiring prompt inspection.

Appliances
5 codes indexed
Urgency
1 high / critical
Popular Fault Codes
E18
E18Bosch / Siemens

Bosch / Siemens Washing Machine Drain Error E18 (F18 / d02)

Drain pump timeout triggered after failing to empty the drum cleanly—officially traced to a clogged front-bottom coin-trap pump filter, jammed pump impeller, kinked rear drain hose, or unremoved sink-siphon knockout plug.

E15Bosch / Siemens

Bosch / Siemens Dishwasher E15 Error (AquaStop Base Flood Triggered)

Water accumulated in the bottom base tray and lifted the AquaStop styrofoam float switch—locking out wash cycles with the water-tap icon until dried, most commonly resolved by installing BSH Sump Seal Repair Kit #12005744.

E09Bosch / Siemens

Bosch / Siemens Dishwasher E09: Circulation Heat Pump Heater Failure

BSH dishwashers combine the heating element directly inside the circulation pump—`E09` triggers when heater coil resistance falls outside ~20–25 Ω (usually `OL` open circuit), harness pins melt, or the board heater relay fails.

E24Bosch / Siemens

Bosch / Siemens Dishwasher E24: Drain Hose, Siphon or Pump Cover Blocked

Washer failed to evacuate sump water in time (paired closely with `E25`)—check kinked hose, under-sink siphon spigot or garbage-disposal knockout plug, and click the white sump drain pump cover firmly locked.

E19Bosch / Siemens

Bosch / Siemens Dishwasher E19: Heat Exchanger Drain Valve Coil Fault

BSH dishwashers log `E19` when the heat-exchanger outlet valve or dispenser coil fails—ohm-test behind the left side panel (`~7.5 kΩ` for blue-plug DC valves, `~2.2 kΩ` for pink-plug pre-2016 AC valves, or `7.5–11.5 kΩ` dispenser coil).

Frequently Asked Questions

What are the most common Bosch / Siemens fault codes?

Among 5 indexed Bosch / Siemens codes in Home Appliances, top lookups include E18, E15, E09, E24. Each diagnostic page breaks down root causes, a 3-step triage check, and realistic repair cost benchmarks.

Is it safe to keep driving or operating Bosch / Siemens with a fault code?

Of the 5 documented Bosch / Siemens codes, 0 are typically safe for limited short-term operation, whereas 1 carry high or critical urgency warnings. Always inspect the safety rating on the specific code guide before continuing.

How do I troubleshoot a Bosch / Siemens error code step by step?

Select your exact fault code (such as E18) from the directory above, review the Quick Answer box, and run through the Interactive Symptom Triage to isolate wiring or sensor issues before purchasing replacement parts.

Bosch / Siemens Fault Codes (E18, E15, E09) — Causes, Fixes & Cost | FaultCodes.org