Audi P0113 Fault Code: Defective Intake Air Temperature Sensor, Dirty air filter, Defective Mass Air Flow Sensor, Faulty or corroded Intake Air Temperature Sensor wiring or connections
Audi P0113 (Engine Cooling & Thermostat): Defective Intake Air Temperature Sensor, Dirty air filter, Defective Mass Air Flow Sensor, Faulty or corroded Intake Air Temperature Sensor wiring or connections.
Audi fault code P0113 indicates Defective Intake Air Temperature Sensor, Dirty air filter, Defective Mass Air Flow Sensor, Faulty or corroded Intake Air Temperature Sensor wiring or connections. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $119–$454.
- Safe to Operate?
- No — Risk of Damage
- DIY Difficulty
- Easy (Basic Tools)
- System
- Engine Cooling & Thermostat
- Professional Repair
- $119 – $454
What This Fault Code Means
Manufacturer-specific Audi diagnostic trouble code P0113: Defective Intake Air Temperature Sensor, Dirty air filter, Defective Mass Air Flow Sensor, Faulty or corroded Intake Air Temperature Sensor wiring or connections.
Common Symptoms
- Warning indicator or active diagnostic code P0113
- Irregular behavior in Engine Cooling & Thermostat
Most Likely Root Causes
- Faulty sensor or actuator in Engine Cooling & Thermostat
- Damaged, corroded, or loose wiring harness connector
Diagnostic Checks Before Replacing Parts
Verify the exact faulty component before ordering replacements.
- 1Read stored freeze-frame data and companion codes alongside P0113.
- 2Inspect electrical connectors, fuses, and harnesses connected to Engine Cooling & Thermostat.
- 3Verify live sensor telemetry before ordering replacement components.
Interactive Symptom Triage
Answer 3 quick checks to narrow down the faulty component before spending money on parts.
Are any companion fault codes stored alongside P0113?
Step-by-Step Troubleshooting & Fix
- 1Scan for companion fault codes and address upstream circuit issues first.
- 2Visually inspect wiring harnesses, plugs, and hoses around Engine Cooling & Thermostat.
- 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
- 4Repair damaged wiring or install an OEM-grade replacement Engine Cooling & Thermostat.
- 5Clear fault memory and run a verification cycle to confirm P0113 does not return.
Estimated Repair Cost Benchmark
Typical DIY parts and certified technician labor ranges. Select a currency below.
| Repair Path | USD |
|---|---|
| DIY Parts Only | $42 – $190 |
| Professional Repair (Parts + Labor) | $119 – $454 |
Frequently Asked Questions
Is it safe to keep operating with fault code P0113?
Avoid prolonged operation until inspected to prevent secondary component damage.
How much does it cost to repair P0113?
DIY replacement parts average $42–$190, while professional service averages $119–$454.
Will resetting P0113 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.
Related Searches & Questions
Manufacturer & Technical Reference
Audi Technical Reference (Engine Cooling & Thermostat)