FaultCodes.org
P0730AudiTransmission & DrivetrainTechnical Reference· Updated: Nov 22, 2026

Audi P0730 Fault Code: Defective Shift Solenoids, Defective Engine Coolant Temperature Sensor, Defective Valve Body, Dirty transmission fluid that restricts the hydraulic passages

Audi P0730 (Transmission & Drivetrain): Defective Shift Solenoids, Defective Engine Coolant Temperature Sensor, Defective Valve Body, Dirty transmission fluid that restricts the hydraulic passages.

Quick AnswerHigh — Service Soon

Audi fault code P0730 indicates Defective Shift Solenoids, Defective Engine Coolant Temperature Sensor, Defective Valve Body, Dirty transmission fluid that restricts the hydraulic passages. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $378–$2592.

Safe to Operate?
No — Risk of Damage
DIY Difficulty
Professional Recommended
System
Transmission & Drivetrain
Professional Repair
$378 – $2,592

What This Fault Code Means

Manufacturer-specific Audi diagnostic trouble code P0730: Defective Shift Solenoids, Defective Engine Coolant Temperature Sensor, Defective Valve Body, Dirty transmission fluid that restricts the hydraulic passages.

Common Symptoms

  • Warning indicator or active diagnostic code P0730
  • Irregular behavior in Transmission & Drivetrain

Most Likely Root Causes

  • Faulty sensor or actuator in Transmission & Drivetrain
  • Damaged, corroded, or loose wiring harness connector

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside P0730.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Transmission & Drivetrain.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside P0730?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Transmission & Drivetrain.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Transmission & Drivetrain.
  5. 5Clear fault memory and run a verification cycle to confirm P0730 does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$132 – $1,089
Professional Repair (Parts + Labor)$378 – $2,592

Certified Technician Service Checklist

This fault involves sealed safety, gas, or high-voltage systems. Share these details when requesting a repair quote.

  • Share exact brand & fault code: Audi P0730 (Transmission & Drivetrain)
  • Record appliance/boiler serial, model plate, or pressure reading before calling
  • Typical certified technician range: $378 – $2,592

Frequently Asked Questions

Is it safe to keep operating with fault code P0730?

Avoid prolonged operation until inspected to prevent secondary component damage.

How much does it cost to repair P0730?

DIY replacement parts average $132–$1089, while professional service averages $378–$2592.

Will resetting P0730 fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

P0730 fault code meaningP0730 repair costhow to fix P0730

Manufacturer & Technical Reference

Audi Technical Reference (Transmission & Drivetrain)

Related Fault Codes

Auto & OBD-II →
Audi P0730 Fault Code: Defective Shift Solenoids… — Fixes & Cost | FaultCodes.org