FaultCodes.org
P0701OBD-IITransmission & DrivetrainTechnical Reference· Updated: Nov 22, 2026

P0701 Fault Code: Transmission Control System Range/Performance

OBD-II P0701 (Transmission & Drivetrain): Transmission Control System Range/Performance.

Quick AnswerHigh — Service Soon

OBD-II fault code P0701 indicates Transmission Control System Range/Performance. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $108–$1620.

Safe to Operate?
No — Risk of Damage
DIY Difficulty
Professional Recommended
System
Transmission & Drivetrain
Professional Repair
$108 – $1,620

What This Fault Code Means

P0701 means the transmission control system works outside its expected range or its function is implausible – without a circuit fault. What exactly is checked is up to the manufacturer; no GM, Ford, Saab or bulletin document available to us describes the strategy. The only manufacturer evidence is Ford's engine module list for 6.8 L E- and F-Series trucks, where P0701 is stored without the check engine light. Typically the control cannot plausibly achieve the requested gear, pressure or torque, and the transmission goes into limp mode. Individual components have their own codes (P0705 ff range sensor, P0715 ff speed sensors, P0750 ff solenoids).

Common Symptoms

  • Transmission warning (at Ford no check engine light)
  • Limp mode with fixed gear or missing gears
  • Harsh or irregular shifts

Most Likely Root Causes

  • Transmission control faulty internally or software
  • Implausible input signals (speed or range sensor) without own circuit fault
  • Wrong fluid level or quality – hydraulics do not respond
  • Harness or connector with contact resistance

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside P0701.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Transmission Control Module.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside P0701?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Transmission Control Module.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Transmission Control Module.
  5. 5Clear fault memory and run a verification cycle to confirm P0701 does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$38 – $680
Professional Repair (Parts + Labor)$108 – $1,620

Certified Technician Service Checklist

This fault involves sealed safety, gas, or high-voltage systems. Share these details when requesting a repair quote.

  • Share exact brand & fault code: P0701 (Transmission & Drivetrain)
  • Record appliance/boiler serial, model plate, or pressure reading before calling
  • Typical certified technician range: $108 – $1,620

Frequently Asked Questions

Is it safe to keep operating with fault code P0701?

Avoid prolonged operation until inspected to prevent secondary component damage.

How much does it cost to repair P0701?

DIY replacement parts average $38–$680, while professional service averages $108–$1620.

Will resetting P0701 fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

P0701 fault code meaningP0701 repair costhow to fix P0701

Manufacturer & Technical Reference

OBD-II Technical Reference (Transmission & Drivetrain)

Related Fault Codes

Auto & OBD-II →
P0701 Fault Code: Transmission Control System Range/Performance | FaultCodes.org