FaultCodes.org
P0703OBD-IITransmission & DrivetrainTechnical Reference· Updated: Nov 22, 2026

P0703 Fault Code: Brake Switch B Circuit

OBD-II P0703 (Transmission & Drivetrain): Brake Switch B Circuit.

Quick AnswerHigh — Service Soon

OBD-II fault code P0703 indicates Brake Switch B Circuit. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $43–$162.

Safe to Operate?
No — Risk of Damage
DIY Difficulty
Easy (Basic Tools)
System
Transmission & Drivetrain
Professional Repair
$43 – $162

What This Fault Code Means

Brake switch A is usually the brake light switch, B a second, redundant contact or signal used to cancel cruise control, release the converter clutch, check 'brake before throttle' and for stop-start. Since about 2014 GM receives it as a CAN message from the body module and checks its integrity (rolling counter, protection value: 3 of 10 faulty in 2014, 9 of 17 in 2025) without the check engine light; cruise control is disabled. Subaru-based systems (Saab 9-2X) check the circuit electrically during stops and starts and light the MIL after two trips. An NHTSA investigation of Hyundai and Kia brake light switches lists P0703 with a brake light that stays on. Brake switch A codes are P0571–P0573, disagreement between A and B is P0504.

Common Symptoms

  • Cruise control cannot be engaged or drops out
  • Brake light stays on or does not work
  • Selector cannot be moved out of P (shift lock)
  • Check engine light depending on the maker

Most Likely Root Causes

  • Brake light or double switch worn, corroded or misadjusted
  • Wiring or connector at the pedal damaged, fuse blown
  • CAN message from the body module disturbed (GM: software, bus fault)
  • Aftermarket LED lamps or trailer module distorting the circuit

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside P0703.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Brake Switch.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside P0703?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Brake Switch.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Brake Switch.
  5. 5Clear fault memory and run a verification cycle to confirm P0703 does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$16 – $68
Professional Repair (Parts + Labor)$43 – $162

Frequently Asked Questions

Is it safe to keep operating with fault code P0703?

Avoid prolonged operation until inspected to prevent secondary component damage.

How much does it cost to repair P0703?

DIY replacement parts average $16–$68, while professional service averages $43–$162.

Will resetting P0703 fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

P0703 fault code meaningP0703 repair costhow to fix P0703

Manufacturer & Technical Reference

OBD-II Technical Reference (Transmission & Drivetrain)

Related Fault Codes

Auto & OBD-II →
P0703 Fault Code: Brake Switch B Circuit — Causes, Fixes & Cost | FaultCodes.org