Audi P0720 Fault Code: Defective Output Speed Sensor, Defective Shift Solenoids, Defective Engine Coolant Temperature Sensor, Defective Valve Body, Dirty transmission fluid that restricts the hydraulic passages, Defective Output Speed Sensor wiring or connector
Audi P0720 (Transmission & Drivetrain): Defective Output Speed Sensor, Defective Shift Solenoids, Defective Engine Coolant Temperature Sensor, Defective Valve Body, Dirty transmission fluid that restricts the hydraulic passages, Defective Output Speed Sensor wiring or connector.
Audi fault code P0720 indicates Defective Output Speed Sensor, Defective Shift Solenoids, Defective Engine Coolant Temperature Sensor, Defective Valve Body, Dirty transmission fluid that restricts the hydraulic passages, Defective Output Speed Sensor wiring or connector. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $378–$2592.
- Safe to Operate?
- No — Risk of Damage
- DIY Difficulty
- Professional Recommended
- System
- Transmission & Drivetrain
- Professional Repair
- $378 – $2,592
What This Fault Code Means
Manufacturer-specific Audi diagnostic trouble code P0720: Defective Output Speed Sensor, Defective Shift Solenoids, Defective Engine Coolant Temperature Sensor, Defective Valve Body, Dirty transmission fluid that restricts the hydraulic passages, Defective Output Speed Sensor wiring or connector.
Common Symptoms
- Warning indicator or active diagnostic code P0720
- Irregular behavior in Transmission & Drivetrain
Most Likely Root Causes
- Faulty sensor or actuator in Transmission & Drivetrain
- Damaged, corroded, or loose wiring harness connector
Diagnostic Checks Before Replacing Parts
Verify the exact faulty component before ordering replacements.
- 1Read stored freeze-frame data and companion codes alongside P0720.
- 2Inspect electrical connectors, fuses, and harnesses connected to Transmission & Drivetrain.
- 3Verify live sensor telemetry before ordering replacement components.
Interactive Symptom Triage
Answer 3 quick checks to narrow down the faulty component before spending money on parts.
Are any companion fault codes stored alongside P0720?
Step-by-Step Troubleshooting & Fix
- 1Scan for companion fault codes and address upstream circuit issues first.
- 2Visually inspect wiring harnesses, plugs, and hoses around Transmission & Drivetrain.
- 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
- 4Repair damaged wiring or install an OEM-grade replacement Transmission & Drivetrain.
- 5Clear fault memory and run a verification cycle to confirm P0720 does not return.
Estimated Repair Cost Benchmark
Typical DIY parts and certified technician labor ranges. Select a currency below.
| Repair Path | USD |
|---|---|
| DIY Parts Only | $132 – $1,089 |
| Professional Repair (Parts + Labor) | $378 – $2,592 |
Certified Technician Service Checklist
This fault involves sealed safety, gas, or high-voltage systems. Share these details when requesting a repair quote.
- Share exact brand & fault code: Audi P0720 (Transmission & Drivetrain)
- Record appliance/boiler serial, model plate, or pressure reading before calling
- Typical certified technician range: $378 – $2,592
Frequently Asked Questions
Is it safe to keep operating with fault code P0720?
Avoid prolonged operation until inspected to prevent secondary component damage.
How much does it cost to repair P0720?
DIY replacement parts average $132–$1089, while professional service averages $378–$2592.
Will resetting P0720 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.
Related Searches & Questions
Manufacturer & Technical Reference
Audi Technical Reference (Transmission & Drivetrain)