U0039 Fault Code: Vehicle Communication Bus B (+) Open
OBD-II U0039 (CAN Bus & Network Communication): Vehicle Communication Bus B (+) Open.
OBD-II fault code U0039 indicates Vehicle Communication Bus B (+) Open. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $65–$756.
- Safe to Operate?
- Yes (Short Term)
- DIY Difficulty
- Professional Recommended
- System
- CAN Bus & Network Communication
- Professional Repair
- $65 – $756
What This Fault Code Means
U0039 reports a break in the (+) conductor of Vehicle Communication Bus B, which on a CAN-type network is CAN-High. Deutz assigns this code to the third CAN channel of its EMR L1 engine controller and lists it for main and secondary ECU simply as an open circuit on CAN 3, without naming the wire. On a classic high-speed CAN the interruption stays invisible to the transceiver; NXP notes that even diagnosing transceivers cannot flag a wire break, so the module infers it from partners falling silent. A fault-tolerant low-speed CAN behaves differently: NXP's TJA1055 keeps sending and receiving after a CAN-High break without spoiling frames already on the line. In practice, functions beyond the break drop out while others carry on. Look for unplugged connectors, backed-out pins and breaks near moving parts.
Common Symptoms
- Functions of modules beyond the break unavailable
- Lost-communication codes for individual modules
Most Likely Root Causes
- (+) wire of Bus B broken, often at a flex point
- Terminal backed out or spread in a connector
- Connector left open after repair work
Diagnostic Checks Before Replacing Parts
Verify the exact faulty component before ordering replacements.
- 1Read stored freeze-frame data and companion codes alongside U0039.
- 2Inspect electrical connectors, fuses, and harnesses connected to Bus B Wiring.
- 3Verify live sensor telemetry before ordering replacement components.
Interactive Symptom Triage
Answer 3 quick checks to narrow down the faulty component before spending money on parts.
Are any companion fault codes stored alongside U0039?
Step-by-Step Troubleshooting & Fix
- 1Scan for companion fault codes and address upstream circuit issues first.
- 2Visually inspect wiring harnesses, plugs, and hoses around Bus B Wiring.
- 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
- 4Repair damaged wiring or install an OEM-grade replacement Bus B Wiring.
- 5Clear fault memory and run a verification cycle to confirm U0039 does not return.
Estimated Repair Cost Benchmark
Typical DIY parts and certified technician labor ranges. Select a currency below.
| Repair Path | USD |
|---|---|
| DIY Parts Only | $23 – $318 |
| Professional Repair (Parts + Labor) | $65 – $756 |
Certified Technician Service Checklist
This fault involves sealed safety, gas, or high-voltage systems. Share these details when requesting a repair quote.
- Share exact brand & fault code: U0039 (CAN Bus & Network Communication)
- Record appliance/boiler serial, model plate, or pressure reading before calling
- Typical certified technician range: $65 – $756
Frequently Asked Questions
Is it safe to keep operating with fault code U0039?
Usually safe for short trips if no severe drivability or safety warnings are active.
How much does it cost to repair U0039?
DIY replacement parts average $23–$318, while professional service averages $65–$756.
Will resetting U0039 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.
Related Searches & Questions
Manufacturer & Technical Reference
OBD-II Technical Reference (CAN Bus & Network Communication)