# OBD-II U0039: Vehicle Communication Bus B (+) Open

> **Quick Answer:** OBD-II fault code U0039 indicates Vehicle Communication Bus B (+) Open. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $65–$756.

- **URL:** https://faultcodes.org/automotive/obd2-u0039
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** CAN Bus & Network Communication
- **Severity:** Moderate — Plan Repair
- **Safe to Operate?:** Yes (Short Term)
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
U0039 reports a break in the (+) conductor of Vehicle Communication Bus B, which on a CAN-type network is CAN-High. Deutz assigns this code to the third CAN channel of its EMR L1 engine controller and lists it for main and secondary ECU simply as an open circuit on CAN 3, without naming the wire. On a classic high-speed CAN the interruption stays invisible to the transceiver; NXP notes that even diagnosing transceivers cannot flag a wire break, so the module infers it from partners falling silent. A fault-tolerant low-speed CAN behaves differently: NXP's TJA1055 keeps sending and receiving after a CAN-High break without spoiling frames already on the line. In practice, functions beyond the break drop out while others carry on. Look for unplugged connectors, backed-out pins and breaks near moving parts.

## Common Symptoms
- Functions of modules beyond the break unavailable
- Lost-communication codes for individual modules

## Most Likely Root Causes
- (+) wire of Bus B broken, often at a flex point
- Terminal backed out or spread in a connector
- Connector left open after repair work

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Bus B Wiring.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Bus B Wiring.
5. Clear fault memory and run a verification cycle to confirm U0039 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $23–$318 | $65–$756 |
| GBP | £18–£250 | £52–£602 |
| CAD | CA$30–CA$426 | CA$87–CA$1015 |
| EUR | €21–€294 | €60–€700 |
| CHF | CHF 24–CHF 338 | CHF 79–CHF 924 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code U0039?
Usually safe for short trips if no severe drivability or safety warnings are active.

### How much does it cost to repair U0039?
DIY replacement parts average $23–$318, while professional service averages $65–$756.

### Will resetting U0039 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

