U0038 Fault Code: Vehicle Communication Bus B Performance
OBD-II U0038 (CAN Bus & Network Communication): Vehicle Communication Bus B Performance.
OBD-II fault code U0038 indicates Vehicle Communication Bus B Performance. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $65–$1620.
- Safe to Operate?
- No — Risk of Damage
- DIY Difficulty
- Professional Recommended
- System
- CAN Bus & Network Communication
- Professional Repair
- $65 – $1,620
What This Fault Code Means
U0038 flags Vehicle Communication Bus B as present but unreliable: frames arrive late, incompletely or for a while not at all, rather than the bus being dead outright. Volkswagen's 2014 Touareg data book describes the trigger as a global time-out in which no messages come in any longer. Honda uses U0038 for the TM-CAN link between transmission and engine control: on 2016-17 Civic CVT models it appeared together with U0101 when an internal TCM fault cut the link, leaving the car stuck in Park without cranking and with several warning lamps lit. Honda replaces the TCM and on 2016 cars also updates the PCM software. Compared with U0037 the code describes a bus that still exists but whose traffic breaks off, so intermittent contacts, a failing node or software are the usual suspects.
Common Symptoms
- Selector stuck in Park, engine does not crank (Honda Civic CVT)
- Several warning lamps on at once
- Functions drop out intermittently
Most Likely Root Causes
- Internal fault in a module on Bus B (Honda Civic: transmission control module)
- Loose or corroded terminals interrupting traffic now and then
- Software mismatch between modules on the bus
Diagnostic Checks Before Replacing Parts
Verify the exact faulty component before ordering replacements.
- 1Read stored freeze-frame data and companion codes alongside U0038.
- 2Inspect electrical connectors, fuses, and harnesses connected to Bus B Wiring.
- 3Verify live sensor telemetry before ordering replacement components.
Interactive Symptom Triage
Answer 3 quick checks to narrow down the faulty component before spending money on parts.
Are any companion fault codes stored alongside U0038?
Step-by-Step Troubleshooting & Fix
- 1Scan for companion fault codes and address upstream circuit issues first.
- 2Visually inspect wiring harnesses, plugs, and hoses around Bus B Wiring.
- 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
- 4Repair damaged wiring or install an OEM-grade replacement Bus B Wiring.
- 5Clear fault memory and run a verification cycle to confirm U0038 does not return.
Estimated Repair Cost Benchmark
Typical DIY parts and certified technician labor ranges. Select a currency below.
| Repair Path | USD |
|---|---|
| DIY Parts Only | $23 – $680 |
| Professional Repair (Parts + Labor) | $65 – $1,620 |
Certified Technician Service Checklist
This fault involves sealed safety, gas, or high-voltage systems. Share these details when requesting a repair quote.
- Share exact brand & fault code: U0038 (CAN Bus & Network Communication)
- Record appliance/boiler serial, model plate, or pressure reading before calling
- Typical certified technician range: $65 – $1,620
Frequently Asked Questions
Is it safe to keep operating with fault code U0038?
Avoid prolonged operation until inspected to prevent secondary component damage.
How much does it cost to repair U0038?
DIY replacement parts average $23–$680, while professional service averages $65–$1620.
Will resetting U0038 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.
Related Searches & Questions
Manufacturer & Technical Reference
OBD-II Technical Reference (CAN Bus & Network Communication)