# OBD-II U0038: Vehicle Communication Bus B Performance

> **Quick Answer:** OBD-II fault code U0038 indicates Vehicle Communication Bus B Performance. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $65–$1620.

- **URL:** https://faultcodes.org/automotive/obd2-u0038
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** CAN Bus & Network Communication
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
U0038 flags Vehicle Communication Bus B as present but unreliable: frames arrive late, incompletely or for a while not at all, rather than the bus being dead outright. Volkswagen's 2014 Touareg data book describes the trigger as a global time-out in which no messages come in any longer. Honda uses U0038 for the TM-CAN link between transmission and engine control: on 2016-17 Civic CVT models it appeared together with U0101 when an internal TCM fault cut the link, leaving the car stuck in Park without cranking and with several warning lamps lit. Honda replaces the TCM and on 2016 cars also updates the PCM software. Compared with U0037 the code describes a bus that still exists but whose traffic breaks off, so intermittent contacts, a failing node or software are the usual suspects.

## Common Symptoms
- Selector stuck in Park, engine does not crank (Honda Civic CVT)
- Several warning lamps on at once
- Functions drop out intermittently

## Most Likely Root Causes
- Internal fault in a module on Bus B (Honda Civic: transmission control module)
- Loose or corroded terminals interrupting traffic now and then
- Software mismatch between modules on the bus

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Bus B Wiring.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Bus B Wiring.
5. Clear fault memory and run a verification cycle to confirm U0038 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $23–$680 | $65–$1620 |
| GBP | £18–£536 | £52–£1290 |
| CAD | CA$30–CA$914 | CA$87–CA$2175 |
| EUR | €21–€630 | €60–€1500 |
| CHF | CHF 24–CHF 725 | CHF 79–CHF 1980 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code U0038?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair U0038?
DIY replacement parts average $23–$680, while professional service averages $65–$1620.

### Will resetting U0038 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

