U0037 Fault Code: Vehicle Communication Bus B
OBD-II U0037 (CAN Bus & Network Communication): Vehicle Communication Bus B.
OBD-II fault code U0037 indicates Vehicle Communication Bus B. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $54–$972.
- Safe to Operate?
- No — Risk of Damage
- DIY Difficulty
- Professional Recommended
- System
- CAN Bus & Network Communication
- Professional Repair
- $54 – $972
What This Fault Code Means
U0037 is the umbrella code for Vehicle Communication Bus B, the second neutral network slot after Bus A; each maker decides which network sits behind it, and published uses differ widely. Volkswagen's 2014 Touareg data book sets it when a CAN frame sent on Bus B goes unacknowledged. FCA calls U0037-00 the LIN bus on the 2018-22 Jeep Wrangler, where it came with U0121 and an intermittent ABS lamp caused by a loose ground point G907A. Volvo's brake control module 2 stores U003700 alongside ECM code P25A268 and a lit check-engine lamp on 2017-24 models; software 3.0.3 cures it. On GM's 2026 full-size SUVs and Silverado/Sierra EV the brake module's U0037-88 procedure is swapped with U0028-88, and Ford reflashes the Mustang GTD dynamics module over false U0037 entries.
Common Symptoms
- Warning lamps of the systems on Bus B, e.g. ABS lamp (Jeep) or check-engine lamp (Volvo)
- Stop/start or chassis functions unavailable
- Lost-communication codes stored alongside
Most Likely Root Causes
- Loose or corroded ground or supply of a module on Bus B (FCA: ground G907A)
- Module software misreporting or mishandling the bus (Volvo BCM2, Ford VDM, GM brake module 2026)
- Damaged bus wiring or a poorly seated connector
- A module on Bus B that has stopped answering
Diagnostic Checks Before Replacing Parts
Verify the exact faulty component before ordering replacements.
- 1Read stored freeze-frame data and companion codes alongside U0037.
- 2Inspect electrical connectors, fuses, and harnesses connected to Bus B Wiring.
- 3Verify live sensor telemetry before ordering replacement components.
Interactive Symptom Triage
Answer 3 quick checks to narrow down the faulty component before spending money on parts.
Are any companion fault codes stored alongside U0037?
Step-by-Step Troubleshooting & Fix
- 1Scan for companion fault codes and address upstream circuit issues first.
- 2Visually inspect wiring harnesses, plugs, and hoses around Bus B Wiring.
- 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
- 4Repair damaged wiring or install an OEM-grade replacement Bus B Wiring.
- 5Clear fault memory and run a verification cycle to confirm U0037 does not return.
Estimated Repair Cost Benchmark
Typical DIY parts and certified technician labor ranges. Select a currency below.
| Repair Path | USD |
|---|---|
| DIY Parts Only | $19 – $408 |
| Professional Repair (Parts + Labor) | $54 – $972 |
Certified Technician Service Checklist
This fault involves sealed safety, gas, or high-voltage systems. Share these details when requesting a repair quote.
- Share exact brand & fault code: U0037 (CAN Bus & Network Communication)
- Record appliance/boiler serial, model plate, or pressure reading before calling
- Typical certified technician range: $54 – $972
Frequently Asked Questions
Is it safe to keep operating with fault code U0037?
Avoid prolonged operation until inspected to prevent secondary component damage.
How much does it cost to repair U0037?
DIY replacement parts average $19–$408, while professional service averages $54–$972.
Will resetting U0037 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.
Related Searches & Questions
Manufacturer & Technical Reference
OBD-II Technical Reference (CAN Bus & Network Communication)