# OBD-II U0037: Vehicle Communication Bus B

> **Quick Answer:** OBD-II fault code U0037 indicates Vehicle Communication Bus B. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $54–$972.

- **URL:** https://faultcodes.org/automotive/obd2-u0037
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** CAN Bus & Network Communication
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
U0037 is the umbrella code for Vehicle Communication Bus B, the second neutral network slot after Bus A; each maker decides which network sits behind it, and published uses differ widely. Volkswagen's 2014 Touareg data book sets it when a CAN frame sent on Bus B goes unacknowledged. FCA calls U0037-00 the LIN bus on the 2018-22 Jeep Wrangler, where it came with U0121 and an intermittent ABS lamp caused by a loose ground point G907A. Volvo's brake control module 2 stores U003700 alongside ECM code P25A268 and a lit check-engine lamp on 2017-24 models; software 3.0.3 cures it. On GM's 2026 full-size SUVs and Silverado/Sierra EV the brake module's U0037-88 procedure is swapped with U0028-88, and Ford reflashes the Mustang GTD dynamics module over false U0037 entries.

## Common Symptoms
- Warning lamps of the systems on Bus B, e.g. ABS lamp (Jeep) or check-engine lamp (Volvo)
- Stop/start or chassis functions unavailable
- Lost-communication codes stored alongside

## Most Likely Root Causes
- Loose or corroded ground or supply of a module on Bus B (FCA: ground G907A)
- Module software misreporting or mishandling the bus (Volvo BCM2, Ford VDM, GM brake module 2026)
- Damaged bus wiring or a poorly seated connector
- A module on Bus B that has stopped answering

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Bus B Wiring.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Bus B Wiring.
5. Clear fault memory and run a verification cycle to confirm U0037 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $19–$408 | $54–$972 |
| GBP | £15–£321 | £43–£774 |
| CAD | CA$26–CA$548 | CA$73–CA$1305 |
| EUR | €18–€378 | €50–€900 |
| CHF | CHF 21–CHF 435 | CHF 66–CHF 1188 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code U0037?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair U0037?
DIY replacement parts average $19–$408, while professional service averages $54–$972.

### Will resetting U0037 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

