FaultCodes.org
U0015OBD-IICAN Bus & Network CommunicationTechnical Reference· Updated: Nov 22, 2026

U0015 Fault Code: Medium Speed CAN Communication Bus (-) Open

OBD-II U0015 (CAN Bus & Network Communication): Medium Speed CAN Communication Bus (-) Open.

Quick AnswerModerate — Plan Repair

OBD-II fault code U0015 indicates Medium Speed CAN Communication Bus (-) Open. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $54–$648.

Safe to Operate?
Yes (Short Term)
DIY Difficulty
Moderate (Intermediate)
System
CAN Bus & Network Communication
Professional Repair
$54 – $648

What This Fault Code Means

U0015 stands for a break in CAN-Low, the (-) conductor of the medium-speed CAN. Modules separated by the break stop exchanging data with the rest of the network, whereas units still connected on both wires keep working; which functions disappear therefore depends on where the line is cut. Ford's F-Super Duty bulletin shows how a single open connector in the MS-CAN switches off the HVAC controls, the front switch panel and the headlamp function together. Common high-speed transceivers cannot diagnose a line interruption themselves (NXP), so the code results from the module's own reasoning about missing replies. No manufacturer documents U0015 publicly. Wiring that moves, such as door, tailgate and seat harnesses, and connectors opened during body or upfit work are the first places to check.

Common Symptoms

  • Only some comfort functions lost, depending on break location
  • Fault varies when doors or seats are moved

Most Likely Root Causes

  • CAN-Low conductor fractured in a moving harness section
  • Connector not reconnected after body or upfit work
  • Corroded CAN-Low splice

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside U0015.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Can Low Wire.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside U0015?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Can Low Wire.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Can Low Wire.
  5. 5Clear fault memory and run a verification cycle to confirm U0015 does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$19 – $272
Professional Repair (Parts + Labor)$54 – $648

Frequently Asked Questions

Is it safe to keep operating with fault code U0015?

Usually safe for short trips if no severe drivability or safety warnings are active.

How much does it cost to repair U0015?

DIY replacement parts average $19–$272, while professional service averages $54–$648.

Will resetting U0015 fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

U0015 fault code meaningU0015 repair costhow to fix U0015

Manufacturer & Technical Reference

OBD-II Technical Reference (CAN Bus & Network Communication)

Related Fault Codes

Auto & OBD-II →
U0015 Fault Code: Medium Speed CAN Communication Bus (-) Open | FaultCodes.org