# OBD-II U0015: Medium Speed CAN Communication Bus (-) Open

> **Quick Answer:** OBD-II fault code U0015 indicates Medium Speed CAN Communication Bus (-) Open. Usually safe for short trips if no severe drivability or safety warnings are active. Typical professional repair costs $54–$648.

- **URL:** https://faultcodes.org/automotive/obd2-u0015
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** CAN Bus & Network Communication
- **Severity:** Moderate — Plan Repair
- **Safe to Operate?:** Yes (Short Term)
- **DIY Difficulty:** Moderate (Intermediate)
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
U0015 stands for a break in CAN-Low, the (-) conductor of the medium-speed CAN. Modules separated by the break stop exchanging data with the rest of the network, whereas units still connected on both wires keep working; which functions disappear therefore depends on where the line is cut. Ford's F-Super Duty bulletin shows how a single open connector in the MS-CAN switches off the HVAC controls, the front switch panel and the headlamp function together. Common high-speed transceivers cannot diagnose a line interruption themselves (NXP), so the code results from the module's own reasoning about missing replies. No manufacturer documents U0015 publicly. Wiring that moves, such as door, tailgate and seat harnesses, and connectors opened during body or upfit work are the first places to check.

## Common Symptoms
- Only some comfort functions lost, depending on break location
- Fault varies when doors or seats are moved

## Most Likely Root Causes
- CAN-Low conductor fractured in a moving harness section
- Connector not reconnected after body or upfit work
- Corroded CAN-Low splice

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Can Low Wire.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Can Low Wire.
5. Clear fault memory and run a verification cycle to confirm U0015 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $19–$272 | $54–$648 |
| GBP | £15–£214 | £43–£516 |
| CAD | CA$26–CA$365 | CA$73–CA$870 |
| EUR | €18–€252 | €50–€600 |
| CHF | CHF 21–CHF 290 | CHF 66–CHF 792 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code U0015?
Usually safe for short trips if no severe drivability or safety warnings are active.

### How much does it cost to repair U0015?
DIY replacement parts average $19–$272, while professional service averages $54–$648.

### Will resetting U0015 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

