FaultCodes.org
P072BOBD-IITransmission & DrivetrainTechnical Reference· Updated: Nov 22, 2026

P072B Fault Code: Stuck in Reverse

OBD-II P072B (Transmission & Drivetrain): Stuck in Reverse.

Quick AnswerHigh — Service Soon

OBD-II fault code P072B indicates Stuck in Reverse. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $216–$3240.

Safe to Operate?
No — Risk of Damage
DIY Difficulty
Professional Recommended
System
Transmission & Drivetrain
Professional Repair
$216 – $3,240

What This Fault Code Means

Ford's DPS6 dry dual-clutch transmission moves its gears with two electrically driven shift drums whose position is read by Hall sensors: drum A shifts 1st, 3rd and 5th, drum B reverse, 2nd, 4th and 6th. Ford's 2012 summary lists 'stuck in gear' codes for each drum: the module commands the drum out of a gear, but the gear stays engaged. It gives no thresholds or MIL rating. P072B is the code for drum B: reverse cannot be disengaged. The transmission then locks out sub-gearbox B and can only use drum A (1st, 3rd, 5th), or the car is stranded. Slip in reverse is P0736.

Common Symptoms

  • Transmission stays in one gear, no further shifts
  • Limp mode, transmission warning
  • Clunking or blocking when shifting

Most Likely Root Causes

  • Shift fork or synchronizer for this gear sticking
  • Shift drum B motor, Hall position sensing or driver faulty
  • Transmission module
  • On planetary automatics: clutch or brake not releasing (sticking valve)

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside P072B.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Shift Drum.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside P072B?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Shift Drum.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Shift Drum.
  5. 5Clear fault memory and run a verification cycle to confirm P072B does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$76 – $1,361
Professional Repair (Parts + Labor)$216 – $3,240

Certified Technician Service Checklist

This fault involves sealed safety, gas, or high-voltage systems. Share these details when requesting a repair quote.

  • Share exact brand & fault code: P072B (Transmission & Drivetrain)
  • Record appliance/boiler serial, model plate, or pressure reading before calling
  • Typical certified technician range: $216 – $3,240

Frequently Asked Questions

Is it safe to keep operating with fault code P072B?

Avoid prolonged operation until inspected to prevent secondary component damage.

How much does it cost to repair P072B?

DIY replacement parts average $76–$1361, while professional service averages $216–$3240.

Will resetting P072B fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

P072B fault code meaningP072B repair costhow to fix P072B

Manufacturer & Technical Reference

OBD-II Technical Reference (Transmission & Drivetrain)

Related Fault Codes

Auto & OBD-II →
P072B Fault Code: Stuck in Reverse — Causes, Fixes & Cost | FaultCodes.org