# OBD-II P072B: Stuck in Reverse

> **Quick Answer:** OBD-II fault code P072B indicates Stuck in Reverse. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $216–$3240.

- **URL:** https://faultcodes.org/automotive/obd2-p072b
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Transmission & Drivetrain
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
Ford's DPS6 dry dual-clutch transmission moves its gears with two electrically driven shift drums whose position is read by Hall sensors: drum A shifts 1st, 3rd and 5th, drum B reverse, 2nd, 4th and 6th. Ford's 2012 summary lists 'stuck in gear' codes for each drum: the module commands the drum out of a gear, but the gear stays engaged. It gives no thresholds or MIL rating. P072B is the code for drum B: reverse cannot be disengaged. The transmission then locks out sub-gearbox B and can only use drum A (1st, 3rd, 5th), or the car is stranded. Slip in reverse is P0736.

## Common Symptoms
- Transmission stays in one gear, no further shifts
- Limp mode, transmission warning
- Clunking or blocking when shifting

## Most Likely Root Causes
- Shift fork or synchronizer for this gear sticking
- Shift drum B motor, Hall position sensing or driver faulty
- Transmission module
- On planetary automatics: clutch or brake not releasing (sticking valve)

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Shift Drum.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Shift Drum.
5. Clear fault memory and run a verification cycle to confirm P072B does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $76–$1361 | $216–$3240 |
| GBP | £60–£1071 | £172–£2580 |
| CAD | CA$102–CA$1827 | CA$290–CA$4350 |
| EUR | €70–€1260 | €200–€3000 |
| CHF | CHF 81–CHF 1449 | CHF 264–CHF 3960 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code P072B?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair P072B?
DIY replacement parts average $76–$1361, while professional service averages $216–$3240.

### Will resetting P072B fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

