FaultCodes.org
P071BOBD-IITransmission & DrivetrainTechnical Reference· Updated: Nov 22, 2026

P071B Fault Code: Transmission Mode Switch A Circuit Low

OBD-II P071B (Transmission & Drivetrain): Transmission Mode Switch A Circuit Low.

Quick AnswerHigh — Service Soon

OBD-II fault code P071B indicates Transmission Mode Switch A Circuit Low. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $43–$324.

Safe to Operate?
No — Risk of Damage
DIY Difficulty
Easy (Basic Tools)
System
Transmission & Drivetrain
Professional Repair
$43 – $324

What This Fault Code Means

A transmission mode switch selects an alternative shift schedule such as sport, winter or tow/haul; J2012 does not define which button is A or B. No manufacturer document available to us uses P071A–P071F: GM monitors its analog drive mode switch under its own codes (low below 21–29 % of 5 V, high from 94 %, 200 of 250 samples, two trips), which shows how such buttons are read as coded voltages. P071B means the signal of mode switch A is below its lower limit: with analog, resistor-coded buttons a short to ground, with digital buttons switching to ground a button stuck pressed. The opposite is P071C.

Common Symptoms

  • Mode A cannot be selected or stays active
  • Mode indicator missing or flashing
  • Transmission stays on the normal shift schedule

Most Likely Root Causes

  • Signal wire shorted to ground
  • Button stuck pressed (switching to ground)
  • Moisture or dirt in the button
  • Control module faulty

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside P071B.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Transmission Mode Switch.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside P071B?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Transmission Mode Switch.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Transmission Mode Switch.
  5. 5Clear fault memory and run a verification cycle to confirm P071B does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$16 – $136
Professional Repair (Parts + Labor)$43 – $324

Frequently Asked Questions

Is it safe to keep operating with fault code P071B?

Avoid prolonged operation until inspected to prevent secondary component damage.

How much does it cost to repair P071B?

DIY replacement parts average $16–$136, while professional service averages $43–$324.

Will resetting P071B fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

P071B fault code meaningP071B repair costhow to fix P071B

Manufacturer & Technical Reference

OBD-II Technical Reference (Transmission & Drivetrain)

Related Fault Codes

Auto & OBD-II →
P071B Fault Code: Transmission Mode Switch A Circuit Low | FaultCodes.org