P0714 Fault Code: Transmission Fluid Temperature Sensor A Circuit Intermittent
OBD-II P0714 (Transmission & Drivetrain): Transmission Fluid Temperature Sensor A Circuit Intermittent.
OBD-II fault code P0714 indicates Transmission Fluid Temperature Sensor A Circuit Intermittent. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $54–$648.
- Safe to Operate?
- No — Risk of Damage
- DIY Difficulty
- Moderate (Intermediate)
- System
- Transmission & Drivetrain
- Professional Repair
- $54 – $648
What This Fault Code Means
The transmission fluid temperature sensor is an NTC thermistor whose resistance falls as the fluid warms; the module feeds it with 5 V through a resistor. A low signal therefore means very hot or a short to ground, a high signal very cold or an open circuit. P0714 means the signal drops out or jumps briefly – not long enough for P0712 or P0713. Ford's 2012 6R80 transmission names P0714 among its fluid temperature checks for open, short and in-range faults. Ram 6.7 bulletins of 2013 changed P0711–P0714 from a one-trip to a two-trip MIL to avoid needless warnings. GM files such jumps under P0711 instead. No source publishes thresholds for P0714 itself. A loose contact in the transmission connector or a chafing internal harness is the usual cause.
Common Symptoms
- Harsh shifts at times
- Jumping fluid temperature display
- Check engine or transmission lamp depending on manufacturer
Most Likely Root Causes
- Loose contact in transmission connector (oil, corrosion, spread pins)
- Internal harness chafing from movement or vibration
- Sensor with internal contact fault
- Module software (false warning)
Diagnostic Checks Before Replacing Parts
Verify the exact faulty component before ordering replacements.
- 1Read stored freeze-frame data and companion codes alongside P0714.
- 2Inspect electrical connectors, fuses, and harnesses connected to Transmission Fluid Temperature Sensor.
- 3Verify live sensor telemetry before ordering replacement components.
Interactive Symptom Triage
Answer 3 quick checks to narrow down the faulty component before spending money on parts.
Are any companion fault codes stored alongside P0714?
Step-by-Step Troubleshooting & Fix
- 1Scan for companion fault codes and address upstream circuit issues first.
- 2Visually inspect wiring harnesses, plugs, and hoses around Transmission Fluid Temperature Sensor.
- 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
- 4Repair damaged wiring or install an OEM-grade replacement Transmission Fluid Temperature Sensor.
- 5Clear fault memory and run a verification cycle to confirm P0714 does not return.
Estimated Repair Cost Benchmark
Typical DIY parts and certified technician labor ranges. Select a currency below.
| Repair Path | USD |
|---|---|
| DIY Parts Only | $19 – $272 |
| Professional Repair (Parts + Labor) | $54 – $648 |
Frequently Asked Questions
Is it safe to keep operating with fault code P0714?
Avoid prolonged operation until inspected to prevent secondary component damage.
How much does it cost to repair P0714?
DIY replacement parts average $19–$272, while professional service averages $54–$648.
Will resetting P0714 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.
Related Searches & Questions
Manufacturer & Technical Reference
OBD-II Technical Reference (Transmission & Drivetrain)