# OBD-II P0714: Transmission Fluid Temperature Sensor A Circuit Intermittent

> **Quick Answer:** OBD-II fault code P0714 indicates Transmission Fluid Temperature Sensor A Circuit Intermittent. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $54–$648.

- **URL:** https://faultcodes.org/automotive/obd2-p0714
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Transmission & Drivetrain
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Moderate (Intermediate)
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
The transmission fluid temperature sensor is an NTC thermistor whose resistance falls as the fluid warms; the module feeds it with 5 V through a resistor. A low signal therefore means very hot or a short to ground, a high signal very cold or an open circuit. P0714 means the signal drops out or jumps briefly – not long enough for P0712 or P0713. Ford's 2012 6R80 transmission names P0714 among its fluid temperature checks for open, short and in-range faults. Ram 6.7 bulletins of 2013 changed P0711–P0714 from a one-trip to a two-trip MIL to avoid needless warnings. GM files such jumps under P0711 instead. No source publishes thresholds for P0714 itself. A loose contact in the transmission connector or a chafing internal harness is the usual cause.

## Common Symptoms
- Harsh shifts at times
- Jumping fluid temperature display
- Check engine or transmission lamp depending on manufacturer

## Most Likely Root Causes
- Loose contact in transmission connector (oil, corrosion, spread pins)
- Internal harness chafing from movement or vibration
- Sensor with internal contact fault
- Module software (false warning)

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Transmission Fluid Temperature Sensor.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Transmission Fluid Temperature Sensor.
5. Clear fault memory and run a verification cycle to confirm P0714 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $19–$272 | $54–$648 |
| GBP | £15–£214 | £43–£516 |
| CAD | CA$26–CA$365 | CA$73–CA$870 |
| EUR | €18–€252 | €50–€600 |
| CHF | CHF 21–CHF 290 | CHF 66–CHF 792 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code P0714?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair P0714?
DIY replacement parts average $19–$272, while professional service averages $54–$648.

### Will resetting P0714 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

