FaultCodes.org
P0711OBD-IITransmission & DrivetrainTechnical Reference· Updated: Nov 22, 2026

P0711 Fault Code: Transmission Fluid Temperature Sensor A Circuit Range/Performance

OBD-II P0711 (Transmission & Drivetrain): Transmission Fluid Temperature Sensor A Circuit Range/Performance.

Quick AnswerHigh — Service Soon

OBD-II fault code P0711 indicates Transmission Fluid Temperature Sensor A Circuit Range/Performance. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $86–$648.

Safe to Operate?
No — Risk of Damage
DIY Difficulty
Moderate (Intermediate)
System
Transmission & Drivetrain
Professional Repair
$86 – $648

What This Fault Code Means

P0711 means the fluid temperature signal is electrically valid but implausible. Manufacturers check three things: the fluid does not warm up as expected (GM 2025 still below 15 °C after the calibrated warm-up time, Saab's AF40 below 20 °C after 10 minutes of driving), the value is stuck (Ford: within ±2 °F for about 2.5 minutes below 70 or above 225 °F), or it jumps unrealistically. GM's 6T70 compares it with the module's internal temperature. The MIL rating varies: GM's newer modules after two trips, Saab AF40 none, Ford none; a 2013 Ram 6.7 bulletin moved P0711–P0714 from one to two trips. A substitute value then limits adaption and converter clutch control.

Common Symptoms

  • Harsh or late shifts
  • Torque converter clutch applies late or not at all
  • Check engine or transmission lamp depending on manufacturer
  • Implausible fluid temperature in the scan tool

Most Likely Root Causes

  • Fluid temperature sensor drifting or stuck
  • High contact resistance in connector or harness (oil, corrosion)
  • Very cold weather or short trips (fluid does not reach warm-up threshold)
  • Outdated module software
  • Fluid cooler thermostat faulty

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside P0711.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Transmission Fluid Temperature Sensor.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside P0711?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Transmission Fluid Temperature Sensor.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Transmission Fluid Temperature Sensor.
  5. 5Clear fault memory and run a verification cycle to confirm P0711 does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$30 – $272
Professional Repair (Parts + Labor)$86 – $648

Frequently Asked Questions

Is it safe to keep operating with fault code P0711?

Avoid prolonged operation until inspected to prevent secondary component damage.

How much does it cost to repair P0711?

DIY replacement parts average $30–$272, while professional service averages $86–$648.

Will resetting P0711 fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

P0711 fault code meaningP0711 repair costhow to fix P0711

Manufacturer & Technical Reference

OBD-II Technical Reference (Transmission & Drivetrain)

Related Fault Codes

Auto & OBD-II →
P0711 Fault Code: Transmission Fluid Temperature… — Fixes & Cost | FaultCodes.org