# OBD-II P0711: Transmission Fluid Temperature Sensor A Circuit Range/Performance

> **Quick Answer:** OBD-II fault code P0711 indicates Transmission Fluid Temperature Sensor A Circuit Range/Performance. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $86–$648.

- **URL:** https://faultcodes.org/automotive/obd2-p0711
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Transmission & Drivetrain
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Moderate (Intermediate)
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
P0711 means the fluid temperature signal is electrically valid but implausible. Manufacturers check three things: the fluid does not warm up as expected (GM 2025 still below 15 °C after the calibrated warm-up time, Saab's AF40 below 20 °C after 10 minutes of driving), the value is stuck (Ford: within ±2 °F for about 2.5 minutes below 70 or above 225 °F), or it jumps unrealistically. GM's 6T70 compares it with the module's internal temperature. The MIL rating varies: GM's newer modules after two trips, Saab AF40 none, Ford none; a 2013 Ram 6.7 bulletin moved P0711–P0714 from one to two trips. A substitute value then limits adaption and converter clutch control.

## Common Symptoms
- Harsh or late shifts
- Torque converter clutch applies late or not at all
- Check engine or transmission lamp depending on manufacturer
- Implausible fluid temperature in the scan tool

## Most Likely Root Causes
- Fluid temperature sensor drifting or stuck
- High contact resistance in connector or harness (oil, corrosion)
- Very cold weather or short trips (fluid does not reach warm-up threshold)
- Outdated module software
- Fluid cooler thermostat faulty

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Transmission Fluid Temperature Sensor.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Transmission Fluid Temperature Sensor.
5. Clear fault memory and run a verification cycle to confirm P0711 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $30–$272 | $86–$648 |
| GBP | £24–£214 | £69–£516 |
| CAD | CA$41–CA$365 | CA$116–CA$870 |
| EUR | €28–€252 | €80–€600 |
| CHF | CHF 32–CHF 290 | CHF 106–CHF 792 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code P0711?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair P0711?
DIY replacement parts average $30–$272, while professional service averages $86–$648.

### Will resetting P0711 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

