FaultCodes.org
P0707OBD-IITransmission & DrivetrainTechnical Reference· Updated: Nov 22, 2026

P0707 Fault Code: Transmission Range Sensor A Circuit Low

OBD-II P0707 (Transmission & Drivetrain): Transmission Range Sensor A Circuit Low.

Quick AnswerHigh — Service Soon

OBD-II fault code P0707 indicates Transmission Range Sensor A Circuit Low. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $86–$648.

Safe to Operate?
No — Risk of Damage
DIY Difficulty
Moderate (Intermediate)
System
Transmission & Drivetrain
Professional Repair
$86 – $648

What This Fault Code Means

The transmission range sensor (selector or multifunction switch, PRNDL) reports the selected range; it may be a multi-contact switch with a bit pattern per position, an analog sensor with two opposing voltages adding up to 5 V, or a contactless PWM sensor. Its second channel has its own codes (P2801–P2805). P0707 means the sensor A signal is too low – usually a short to ground or lost supply. GM's T87A transmission module flags a PWM duty cycle below 8.8 % for 0.5 s within 1.5 s, with the lamp in the first trip; Ford flags a duty cycle below 10 %, an analog sensor below 0.2 V for 5 s or a dual-analog channel below 0.127 V for 200 ms; Saab's 9-5 (9650) below 0.127 V for 100 ms twice. 'Low' refers to the signal, not to a gear.

Common Symptoms

  • Check engine and/or transmission warning lamp
  • Transmission limp mode, fixed gear, harsh shifts
  • Starting problems in P/N or start interlock
  • Wrong gear indication, reversing light not working

Most Likely Root Causes

  • Signal wire shorted to ground (chafing at the transmission case)
  • Sensor faulty internally
  • Sensor supply missing (5 V reference, fuse)
  • Connector corroded or oil in the connector

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside P0707.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Transmission Range Sensor.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside P0707?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Transmission Range Sensor.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Transmission Range Sensor.
  5. 5Clear fault memory and run a verification cycle to confirm P0707 does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$30 – $272
Professional Repair (Parts + Labor)$86 – $648

Frequently Asked Questions

Is it safe to keep operating with fault code P0707?

Avoid prolonged operation until inspected to prevent secondary component damage.

How much does it cost to repair P0707?

DIY replacement parts average $30–$272, while professional service averages $86–$648.

Will resetting P0707 fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

P0707 fault code meaningP0707 repair costhow to fix P0707

Manufacturer & Technical Reference

OBD-II Technical Reference (Transmission & Drivetrain)

Related Fault Codes

Auto & OBD-II →
P0707 Fault Code: Transmission Range Sensor A Circuit Low | FaultCodes.org