# OBD-II P0707: Transmission Range Sensor A Circuit Low

> **Quick Answer:** OBD-II fault code P0707 indicates Transmission Range Sensor A Circuit Low. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $86–$648.

- **URL:** https://faultcodes.org/automotive/obd2-p0707
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Transmission & Drivetrain
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Moderate (Intermediate)
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
The transmission range sensor (selector or multifunction switch, PRNDL) reports the selected range; it may be a multi-contact switch with a bit pattern per position, an analog sensor with two opposing voltages adding up to 5 V, or a contactless PWM sensor. Its second channel has its own codes (P2801–P2805). P0707 means the sensor A signal is too low – usually a short to ground or lost supply. GM's T87A transmission module flags a PWM duty cycle below 8.8 % for 0.5 s within 1.5 s, with the lamp in the first trip; Ford flags a duty cycle below 10 %, an analog sensor below 0.2 V for 5 s or a dual-analog channel below 0.127 V for 200 ms; Saab's 9-5 (9650) below 0.127 V for 100 ms twice. 'Low' refers to the signal, not to a gear.

## Common Symptoms
- Check engine and/or transmission warning lamp
- Transmission limp mode, fixed gear, harsh shifts
- Starting problems in P/N or start interlock
- Wrong gear indication, reversing light not working

## Most Likely Root Causes
- Signal wire shorted to ground (chafing at the transmission case)
- Sensor faulty internally
- Sensor supply missing (5 V reference, fuse)
- Connector corroded or oil in the connector

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Transmission Range Sensor.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Transmission Range Sensor.
5. Clear fault memory and run a verification cycle to confirm P0707 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $30–$272 | $86–$648 |
| GBP | £24–£214 | £69–£516 |
| CAD | CA$41–CA$365 | CA$116–CA$870 |
| EUR | €28–€252 | €80–€600 |
| CHF | CHF 32–CHF 290 | CHF 106–CHF 792 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code P0707?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair P0707?
DIY replacement parts average $30–$272, while professional service averages $86–$648.

### Will resetting P0707 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

