FaultCodes.org
P0706OBD-IITransmission & DrivetrainTechnical Reference· Updated: Nov 22, 2026

P0706 Fault Code: Transmission Range Sensor A Circuit Range/Performance

OBD-II P0706 (Transmission & Drivetrain): Transmission Range Sensor A Circuit Range/Performance.

Quick AnswerHigh — Service Soon

OBD-II fault code P0706 indicates Transmission Range Sensor A Circuit Range/Performance. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $86–$972.

Safe to Operate?
No — Risk of Damage
DIY Difficulty
Moderate (Intermediate)
System
Transmission & Drivetrain
Professional Repair
$86 – $972

What This Fault Code Means

The transmission range sensor (selector or multifunction switch, PRNDL) reports the selected range; it may be a multi-contact switch with a bit pattern per position, an analog sensor with two opposing voltages adding up to 5 V, or a contactless PWM sensor. Its second channel has its own codes (P2801–P2805). P0706 means the signal is present but implausible. Ford uses it per transmission: for its PWM sensor when the frequency leaves 100–175 Hz (nominal 125 Hz), for the 6F digital sensor when it stays in the transition zone between two positions. Saab's 9-5 (9650), whose sensor sits in the transmission module, flags a sum of the two opposing channels more than 0.29 V away from 5 V, with the lamp in the first trip; adaptations are frozen, the gearbox holds 2nd gear in D and the engine may not restart after switch-off.

Common Symptoms

  • Check engine and/or transmission warning lamp
  • Transmission limp mode, fixed gear, harsh shifts
  • Starting problems in P/N or start interlock
  • Wrong gear indication, reversing light not working

Most Likely Root Causes

  • Range sensor or transmission module with integrated sensor faulty
  • Selector cable or sensor misadjusted (position between two ranges)
  • Contact resistance in sensor supply or ground
  • Moisture or oil in harness or connector

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside P0706.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Transmission Range Sensor.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside P0706?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Transmission Range Sensor.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Transmission Range Sensor.
  5. 5Clear fault memory and run a verification cycle to confirm P0706 does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$30 – $408
Professional Repair (Parts + Labor)$86 – $972

Frequently Asked Questions

Is it safe to keep operating with fault code P0706?

Avoid prolonged operation until inspected to prevent secondary component damage.

How much does it cost to repair P0706?

DIY replacement parts average $30–$408, while professional service averages $86–$972.

Will resetting P0706 fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

P0706 fault code meaningP0706 repair costhow to fix P0706

Manufacturer & Technical Reference

OBD-II Technical Reference (Transmission & Drivetrain)

Related Fault Codes

Auto & OBD-II →
P0706 Fault Code: Transmission Range Sensor A… — Fixes & Cost | FaultCodes.org