# OBD-II P0706: Transmission Range Sensor A Circuit Range/Performance

> **Quick Answer:** OBD-II fault code P0706 indicates Transmission Range Sensor A Circuit Range/Performance. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $86–$972.

- **URL:** https://faultcodes.org/automotive/obd2-p0706
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Transmission & Drivetrain
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Moderate (Intermediate)
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
The transmission range sensor (selector or multifunction switch, PRNDL) reports the selected range; it may be a multi-contact switch with a bit pattern per position, an analog sensor with two opposing voltages adding up to 5 V, or a contactless PWM sensor. Its second channel has its own codes (P2801–P2805). P0706 means the signal is present but implausible. Ford uses it per transmission: for its PWM sensor when the frequency leaves 100–175 Hz (nominal 125 Hz), for the 6F digital sensor when it stays in the transition zone between two positions. Saab's 9-5 (9650), whose sensor sits in the transmission module, flags a sum of the two opposing channels more than 0.29 V away from 5 V, with the lamp in the first trip; adaptations are frozen, the gearbox holds 2nd gear in D and the engine may not restart after switch-off.

## Common Symptoms
- Check engine and/or transmission warning lamp
- Transmission limp mode, fixed gear, harsh shifts
- Starting problems in P/N or start interlock
- Wrong gear indication, reversing light not working

## Most Likely Root Causes
- Range sensor or transmission module with integrated sensor faulty
- Selector cable or sensor misadjusted (position between two ranges)
- Contact resistance in sensor supply or ground
- Moisture or oil in harness or connector

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Transmission Range Sensor.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Transmission Range Sensor.
5. Clear fault memory and run a verification cycle to confirm P0706 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $30–$408 | $86–$972 |
| GBP | £24–£321 | £69–£774 |
| CAD | CA$41–CA$548 | CA$116–CA$1305 |
| EUR | €28–€378 | €80–€900 |
| CHF | CHF 32–CHF 435 | CHF 106–CHF 1188 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code P0706?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair P0706?
DIY replacement parts average $30–$408, while professional service averages $86–$972.

### Will resetting P0706 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

