P045E Fault Code: EGR B Control Stuck Open
OBD-II P045E (EVAP Emissions Control): EGR B Control Stuck Open.
OBD-II fault code P045E indicates EGR B Control Stuck Open. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $108–$1296.
- Safe to Operate?
- No — Risk of Damage
- DIY Difficulty
- Moderate (Intermediate)
- System
- EVAP Emissions Control
- Professional Repair
- $108 – $1,296
What This Fault Code Means
Exhaust gas recirculation (EGR) routes part of the exhaust back into the intake to lower combustion temperature and NOx. EGR B is a second EGR valve next to valve A – on diesels with two EGR circuits the low-pressure valve, which takes exhaust after the particulate filter and feeds it in before the turbo compressor. GM's diesels of 2016–18 and FCA's 2.2-litre diesel in the Jeep Wrangler use it. P045E means valve B does not close: its actual position stays above the target despite the close command. On FCA's 2.2-litre diesel in the Jeep Wrangler, deposits in the low-pressure valve cause it; the bulletin prescribes a cleaning routine of nine ignition cycles that moves the valve repeatedly. Another FCA bulletin shows P045E following a position sensor fault (P0407/P0408). Too much EGR causes misfire, lack of power and smoke.
Common Symptoms
- Check engine light on
- Lack of power, rough running, misfire
- Possibly black smoke
Most Likely Root Causes
- Soot or condensate deposits in the low-pressure valve
- Valve position sensor fault as the trigger
- Actuator gear or return spring faulty
- Foreign matter or filter debris in the low-pressure circuit
Diagnostic Checks Before Replacing Parts
Verify the exact faulty component before ordering replacements.
- 1Read stored freeze-frame data and companion codes alongside P045E.
- 2Inspect electrical connectors, fuses, and harnesses connected to Egr Valve B.
- 3Verify live sensor telemetry before ordering replacement components.
Interactive Symptom Triage
Answer 3 quick checks to narrow down the faulty component before spending money on parts.
Are any companion fault codes stored alongside P045E?
Step-by-Step Troubleshooting & Fix
- 1Scan for companion fault codes and address upstream circuit issues first.
- 2Visually inspect wiring harnesses, plugs, and hoses around Egr Valve B.
- 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
- 4Repair damaged wiring or install an OEM-grade replacement Egr Valve B.
- 5Clear fault memory and run a verification cycle to confirm P045E does not return.
Estimated Repair Cost Benchmark
Typical DIY parts and certified technician labor ranges. Select a currency below.
| Repair Path | USD |
|---|---|
| DIY Parts Only | $38 – $544 |
| Professional Repair (Parts + Labor) | $108 – $1,296 |
Frequently Asked Questions
Is it safe to keep operating with fault code P045E?
Avoid prolonged operation until inspected to prevent secondary component damage.
How much does it cost to repair P045E?
DIY replacement parts average $38–$544, while professional service averages $108–$1296.
Will resetting P045E fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.
Related Searches & Questions
Manufacturer & Technical Reference
OBD-II Technical Reference (EVAP Emissions Control)