# OBD-II P045E: EGR B Control Stuck Open

> **Quick Answer:** OBD-II fault code P045E indicates EGR B Control Stuck Open. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $108–$1296.

- **URL:** https://faultcodes.org/automotive/obd2-p045e
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** EVAP Emissions Control
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Moderate (Intermediate)
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
Exhaust gas recirculation (EGR) routes part of the exhaust back into the intake to lower combustion temperature and NOx. EGR B is a second EGR valve next to valve A – on diesels with two EGR circuits the low-pressure valve, which takes exhaust after the particulate filter and feeds it in before the turbo compressor. GM's diesels of 2016–18 and FCA's 2.2-litre diesel in the Jeep Wrangler use it. P045E means valve B does not close: its actual position stays above the target despite the close command. On FCA's 2.2-litre diesel in the Jeep Wrangler, deposits in the low-pressure valve cause it; the bulletin prescribes a cleaning routine of nine ignition cycles that moves the valve repeatedly. Another FCA bulletin shows P045E following a position sensor fault (P0407/P0408). Too much EGR causes misfire, lack of power and smoke.

## Common Symptoms
- Check engine light on
- Lack of power, rough running, misfire
- Possibly black smoke

## Most Likely Root Causes
- Soot or condensate deposits in the low-pressure valve
- Valve position sensor fault as the trigger
- Actuator gear or return spring faulty
- Foreign matter or filter debris in the low-pressure circuit

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Egr Valve B.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Egr Valve B.
5. Clear fault memory and run a verification cycle to confirm P045E does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $38–$544 | $108–$1296 |
| GBP | £30–£428 | £86–£1032 |
| CAD | CA$51–CA$731 | CA$145–CA$1740 |
| EUR | €35–€504 | €100–€1200 |
| CHF | CHF 40–CHF 580 | CHF 132–CHF 1584 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code P045E?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair P045E?
DIY replacement parts average $38–$544, while professional service averages $108–$1296.

### Will resetting P045E fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

