FaultCodes.org
P0329OBD-IIIgnition & Misfire SystemTechnical Reference· Updated: Nov 22, 2026

P0329 Fault Code: Knock/Combustion Vibration Sensor A Circuit Intermittent

OBD-II P0329 (Ignition & Misfire System): Knock/Combustion Vibration Sensor A Circuit Intermittent.

Quick AnswerHigh — Service Soon

OBD-II fault code P0329 indicates Knock/Combustion Vibration Sensor A Circuit Intermittent. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $43–$432.

Safe to Operate?
No — Risk of Damage
DIY Difficulty
Moderate (Intermediate)
System
Ignition & Misfire System
Professional Repair
$43 – $432

What This Fault Code Means

The knock sensor is a piezoelectric structure-borne sound sensor bolted to the engine block; the module evaluates its signal per cylinder and retards ignition when it detects knock. Sensor A is the first sensor (bank 1 or a single sensor). With a fault the module retards ignition across the board as protection – noticeable loss of power and higher consumption. P0329 reports brief dropouts of the sensor signal – loose contacts, a wire breaking with engine movement and heat, or a loose sensor. No manufacturer document with a threshold for this code was found; GM and Ford cover such faults with their circuit codes, so the description follows CARB's input monitoring requirement.

Common Symptoms

  • Check engine light on
  • Loss of power, sluggish response from ignition retard
  • Higher fuel consumption

Most Likely Root Causes

  • Loose contact, spread pins or corrosion in the connector
  • Wire chafing only with engine movement or heat
  • Sensor loose or wrongly torqued
  • Sensor or engine module faulty

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside P0329.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Knock Sensor A.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside P0329?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Knock Sensor A.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Knock Sensor A.
  5. 5Clear fault memory and run a verification cycle to confirm P0329 does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$16 – $181
Professional Repair (Parts + Labor)$43 – $432

Frequently Asked Questions

Is it safe to keep operating with fault code P0329?

Avoid prolonged operation until inspected to prevent secondary component damage.

How much does it cost to repair P0329?

DIY replacement parts average $16–$181, while professional service averages $43–$432.

Will resetting P0329 fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

P0329 fault code meaningP0329 repair costhow to fix P0329

Manufacturer & Technical Reference

OBD-II Technical Reference (Ignition & Misfire System)

Related Fault Codes

Auto & OBD-II →
P0329 Fault Code: Knock/Combustion Vibration Sensor… — Fixes & Cost | FaultCodes.org