# OBD-II P0329: Knock/Combustion Vibration Sensor A Circuit Intermittent

> **Quick Answer:** OBD-II fault code P0329 indicates Knock/Combustion Vibration Sensor A Circuit Intermittent. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $43–$432.

- **URL:** https://faultcodes.org/automotive/obd2-p0329
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Ignition & Misfire System
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Moderate (Intermediate)
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
The knock sensor is a piezoelectric structure-borne sound sensor bolted to the engine block; the module evaluates its signal per cylinder and retards ignition when it detects knock. Sensor A is the first sensor (bank 1 or a single sensor). With a fault the module retards ignition across the board as protection – noticeable loss of power and higher consumption. P0329 reports brief dropouts of the sensor signal – loose contacts, a wire breaking with engine movement and heat, or a loose sensor. No manufacturer document with a threshold for this code was found; GM and Ford cover such faults with their circuit codes, so the description follows CARB's input monitoring requirement.

## Common Symptoms
- Check engine light on
- Loss of power, sluggish response from ignition retard
- Higher fuel consumption

## Most Likely Root Causes
- Loose contact, spread pins or corrosion in the connector
- Wire chafing only with engine movement or heat
- Sensor loose or wrongly torqued
- Sensor or engine module faulty

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Knock Sensor A.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Knock Sensor A.
5. Clear fault memory and run a verification cycle to confirm P0329 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $16–$181 | $43–$432 |
| GBP | £13–£143 | £34–£344 |
| CAD | CA$22–CA$244 | CA$58–CA$580 |
| EUR | €15–€168 | €40–€400 |
| CHF | CHF 17–CHF 193 | CHF 53–CHF 528 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code P0329?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair P0329?
DIY replacement parts average $16–$181, while professional service averages $43–$432.

### Will resetting P0329 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

