FaultCodes.org
P0324OBD-IIIgnition & Misfire SystemTechnical Reference· Updated: Nov 22, 2026

P0324 Fault Code: Knock/Combustion Vibration Control System Error

OBD-II P0324 (Ignition & Misfire System): Knock/Combustion Vibration Control System Error.

Quick AnswerHigh — Service Soon

OBD-II fault code P0324 indicates Knock/Combustion Vibration Control System Error. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $43–$540.

Safe to Operate?
No — Risk of Damage
DIY Difficulty
Moderate (Intermediate)
System
Ignition & Misfire System
Professional Repair
$43 – $540

What This Fault Code Means

P0324 concerns the knock control as a whole rather than a single sensor circuit. GM and Saab's GM-based engines set it when excessive knock persists on one cylinder – knock despite ignition retard, or mechanical noise taken for knock – for more than 8–10 s; GM's 2018 engines in the first trip, older ones after two. Older GM calibrations also flag an abnormally low or flat signal per cylinder here. Ignition is retarded. Typical causes are low-octane fuel, carbon deposits, high intake or coolant temperature, lean running, or loose parts and valve train noise. Ford does not use this code; GM reports internal processor faults separately (P06B6/P06B7).

Common Symptoms

  • Check engine light on
  • Loss of power from ignition retard
  • Audible pinging or knocking under load
  • Higher fuel consumption

Most Likely Root Causes

  • Genuine knock: low-octane fuel, carbon deposits, high intake or coolant temperature, lean mixture
  • Mechanical noise taken for knock (loose parts, brackets, valve train, bearings)
  • Knock sensor damaged, wrongly torqued or mounted with sealant
  • Engine software or calibration

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside P0324.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Knock Control.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside P0324?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Knock Control.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Knock Control.
  5. 5Clear fault memory and run a verification cycle to confirm P0324 does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$16 – $227
Professional Repair (Parts + Labor)$43 – $540

Frequently Asked Questions

Is it safe to keep operating with fault code P0324?

Avoid prolonged operation until inspected to prevent secondary component damage.

How much does it cost to repair P0324?

DIY replacement parts average $16–$227, while professional service averages $43–$540.

Will resetting P0324 fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

P0324 fault code meaningP0324 repair costhow to fix P0324

Manufacturer & Technical Reference

OBD-II Technical Reference (Ignition & Misfire System)

Related Fault Codes

Auto & OBD-II →
P0324 Fault Code: Knock/Combustion Vibration Control System Error | FaultCodes.org