# OBD-II P0324: Knock/Combustion Vibration Control System Error

> **Quick Answer:** OBD-II fault code P0324 indicates Knock/Combustion Vibration Control System Error. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $43–$540.

- **URL:** https://faultcodes.org/automotive/obd2-p0324
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Ignition & Misfire System
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Moderate (Intermediate)
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
P0324 concerns the knock control as a whole rather than a single sensor circuit. GM and Saab's GM-based engines set it when excessive knock persists on one cylinder – knock despite ignition retard, or mechanical noise taken for knock – for more than 8–10 s; GM's 2018 engines in the first trip, older ones after two. Older GM calibrations also flag an abnormally low or flat signal per cylinder here. Ignition is retarded. Typical causes are low-octane fuel, carbon deposits, high intake or coolant temperature, lean running, or loose parts and valve train noise. Ford does not use this code; GM reports internal processor faults separately (P06B6/P06B7).

## Common Symptoms
- Check engine light on
- Loss of power from ignition retard
- Audible pinging or knocking under load
- Higher fuel consumption

## Most Likely Root Causes
- Genuine knock: low-octane fuel, carbon deposits, high intake or coolant temperature, lean mixture
- Mechanical noise taken for knock (loose parts, brackets, valve train, bearings)
- Knock sensor damaged, wrongly torqued or mounted with sealant
- Engine software or calibration

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Knock Control.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Knock Control.
5. Clear fault memory and run a verification cycle to confirm P0324 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $16–$227 | $43–$540 |
| GBP | £13–£179 | £34–£430 |
| CAD | CA$22–CA$305 | CA$58–CA$725 |
| EUR | €15–€210 | €40–€500 |
| CHF | CHF 17–CHF 241 | CHF 53–CHF 660 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code P0324?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair P0324?
DIY replacement parts average $16–$227, while professional service averages $43–$540.

### Will resetting P0324 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

