FaultCodes.org
P0323OBD-IIIgnition & Misfire SystemTechnical Reference· Updated: Nov 22, 2026

P0323 Fault Code: Ignition/Distributor Engine Speed Input Circuit Intermittent

OBD-II P0323 (Ignition & Misfire System): Ignition/Distributor Engine Speed Input Circuit Intermittent.

Quick AnswerHigh — Service Soon

OBD-II fault code P0323 indicates Ignition/Distributor Engine Speed Input Circuit Intermittent. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $43–$324.

Safe to Operate?
No — Risk of Damage
DIY Difficulty
Moderate (Intermediate)
System
Ignition & Misfire System
Professional Repair
$43 – $324

What This Fault Code Means

P0323 stands for a speed and reference signal at the ignition input – today the crankshaft position sensor – that drops out or is disturbed for moments and then recovers. None of the manufacturer documents available to us (GM 2014–2019, Ford 2012 and 2020–2023, Saab workshop information) uses P0323; the sporadic crank sensor check runs under P0339 at Ford and under P0336 at GM. Ford's logic shows what is evaluated: teeth missing or extra for a moment and the reference gap appearing at an unexpected position, after which the module briefly cuts fuel and spark and resynchronises. Typical causes are a loose contact, chafed wiring and electrical interference. The code itself is described only by its J2012 name and CARB's monitoring requirement for crank angle sensors.

Common Symptoms

  • Brief stumbling or stalling, then normal again
  • Sporadic misfire
  • Tachometer flickers
  • Check engine light on

Most Likely Root Causes

  • Loose contact or corrosion at the sensor connector
  • Chafed wiring, break under vibration
  • Sensor dropping out when hot
  • Interference from neighbouring wires

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside P0323.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Crankshaft Position Sensor.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside P0323?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Crankshaft Position Sensor.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Crankshaft Position Sensor.
  5. 5Clear fault memory and run a verification cycle to confirm P0323 does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$16 – $136
Professional Repair (Parts + Labor)$43 – $324

Frequently Asked Questions

Is it safe to keep operating with fault code P0323?

Avoid prolonged operation until inspected to prevent secondary component damage.

How much does it cost to repair P0323?

DIY replacement parts average $16–$136, while professional service averages $43–$324.

Will resetting P0323 fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

P0323 fault code meaningP0323 repair costhow to fix P0323

Manufacturer & Technical Reference

OBD-II Technical Reference (Ignition & Misfire System)

Related Fault Codes

Auto & OBD-II →
P0323 Fault Code: Ignition/Distributor Engine Speed… — Fixes & Cost | FaultCodes.org