# OBD-II P0323: Ignition/Distributor Engine Speed Input Circuit Intermittent

> **Quick Answer:** OBD-II fault code P0323 indicates Ignition/Distributor Engine Speed Input Circuit Intermittent. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $43–$324.

- **URL:** https://faultcodes.org/automotive/obd2-p0323
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Ignition & Misfire System
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Moderate (Intermediate)
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
P0323 stands for a speed and reference signal at the ignition input – today the crankshaft position sensor – that drops out or is disturbed for moments and then recovers. None of the manufacturer documents available to us (GM 2014–2019, Ford 2012 and 2020–2023, Saab workshop information) uses P0323; the sporadic crank sensor check runs under P0339 at Ford and under P0336 at GM. Ford's logic shows what is evaluated: teeth missing or extra for a moment and the reference gap appearing at an unexpected position, after which the module briefly cuts fuel and spark and resynchronises. Typical causes are a loose contact, chafed wiring and electrical interference. The code itself is described only by its J2012 name and CARB's monitoring requirement for crank angle sensors.

## Common Symptoms
- Brief stumbling or stalling, then normal again
- Sporadic misfire
- Tachometer flickers
- Check engine light on

## Most Likely Root Causes
- Loose contact or corrosion at the sensor connector
- Chafed wiring, break under vibration
- Sensor dropping out when hot
- Interference from neighbouring wires

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Crankshaft Position Sensor.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Crankshaft Position Sensor.
5. Clear fault memory and run a verification cycle to confirm P0323 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $16–$136 | $43–$324 |
| GBP | £13–£107 | £34–£258 |
| CAD | CA$22–CA$183 | CA$58–CA$435 |
| EUR | €15–€126 | €40–€300 |
| CHF | CHF 17–CHF 145 | CHF 53–CHF 396 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code P0323?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair P0323?
DIY replacement parts average $16–$136, while professional service averages $43–$324.

### Will resetting P0323 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

