FaultCodes.org
P0319OBD-IIIgnition & Misfire SystemTechnical Reference· Updated: Nov 22, 2026

P0319 Fault Code: Rough Road Sensor B Signal Circuit

OBD-II P0319 (Ignition & Misfire System): Rough Road Sensor B Signal Circuit.

Quick AnswerHigh — Service Soon

OBD-II fault code P0319 indicates Rough Road Sensor B Signal Circuit. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $54–$432.

Safe to Operate?
No — Risk of Damage
DIY Difficulty
Moderate (Intermediate)
System
Ignition & Misfire System
Professional Repair
$54 – $432

What This Fault Code Means

Misfire detection works from crankshaft speed fluctuations, which rough roads also cause. CARB therefore allows misfire detection to pause on rough roads; many engines take a rough-road signal from the wheel speeds of the ABS module, a Ford patent describes such a detector. P0319 is like P0318, but for a second rough-road signal source B – depending on the manufacturer, for example an acceleration sensor or transmission output speed. The signal is missing or invalid, so misfire detection runs without its rough-road filter. No manufacturer using P0319 was found; following GM's handling of P0318, the warning light often stays off.

Common Symptoms

  • Warning light (manufacturer-dependent, often none)
  • Possibly ABS or transmission codes
  • Driving unaffected

Most Likely Root Causes

  • Signal source B or its wiring faulty
  • Communication fault to the supplying module (ABS, transmission)
  • Configuration or software
  • Engine module faulty

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside P0319.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Rough Road Sensor B.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside P0319?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Rough Road Sensor B.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Rough Road Sensor B.
  5. 5Clear fault memory and run a verification cycle to confirm P0319 does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$19 – $181
Professional Repair (Parts + Labor)$54 – $432

Frequently Asked Questions

Is it safe to keep operating with fault code P0319?

Avoid prolonged operation until inspected to prevent secondary component damage.

How much does it cost to repair P0319?

DIY replacement parts average $19–$181, while professional service averages $54–$432.

Will resetting P0319 fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

P0319 fault code meaningP0319 repair costhow to fix P0319

Manufacturer & Technical Reference

OBD-II Technical Reference (Ignition & Misfire System)

Related Fault Codes

Auto & OBD-II →
P0319 Fault Code: Rough Road Sensor B Signal Circuit — Fixes & Cost | FaultCodes.org