# OBD-II P0319: Rough Road Sensor B Signal Circuit

> **Quick Answer:** OBD-II fault code P0319 indicates Rough Road Sensor B Signal Circuit. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $54–$432.

- **URL:** https://faultcodes.org/automotive/obd2-p0319
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Ignition & Misfire System
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Moderate (Intermediate)
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
Misfire detection works from crankshaft speed fluctuations, which rough roads also cause. CARB therefore allows misfire detection to pause on rough roads; many engines take a rough-road signal from the wheel speeds of the ABS module, a Ford patent describes such a detector. P0319 is like P0318, but for a second rough-road signal source B – depending on the manufacturer, for example an acceleration sensor or transmission output speed. The signal is missing or invalid, so misfire detection runs without its rough-road filter. No manufacturer using P0319 was found; following GM's handling of P0318, the warning light often stays off.

## Common Symptoms
- Warning light (manufacturer-dependent, often none)
- Possibly ABS or transmission codes
- Driving unaffected

## Most Likely Root Causes
- Signal source B or its wiring faulty
- Communication fault to the supplying module (ABS, transmission)
- Configuration or software
- Engine module faulty

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Rough Road Sensor B.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Rough Road Sensor B.
5. Clear fault memory and run a verification cycle to confirm P0319 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $19–$181 | $54–$432 |
| GBP | £15–£143 | £43–£344 |
| CAD | CA$26–CA$244 | CA$73–CA$580 |
| EUR | €18–€168 | €50–€400 |
| CHF | CHF 21–CHF 193 | CHF 66–CHF 528 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code P0319?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair P0319?
DIY replacement parts average $19–$181, while professional service averages $54–$432.

### Will resetting P0319 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

