FaultCodes.org
P0317OBD-IIIgnition & Misfire SystemTechnical Reference· Updated: Nov 22, 2026

P0317 Fault Code: Rough Road Hardware Not Present

OBD-II P0317 (Ignition & Misfire System): Rough Road Hardware Not Present.

Quick AnswerHigh — Service Soon

OBD-II fault code P0317 indicates Rough Road Hardware Not Present. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $86–$648.

Safe to Operate?
No — Risk of Damage
DIY Difficulty
Moderate (Intermediate)
System
Ignition & Misfire System
Professional Repair
$86 – $648

What This Fault Code Means

Misfire detection works from crankshaft speed fluctuations, which rough roads also cause. CARB therefore allows misfire detection to pause on rough roads; many engines take a rough-road signal from the wheel speeds of the ABS module, a Ford patent describes such a detector. P0317 means the engine module is calibrated for an external rough-road signal but does not find the hardware: the supplying module does not respond on the data bus, or the configuration does not match the equipment – for example after replacing the engine or ABS module. Without the signal misfire detection cannot separate road bumps from misfires. No manufacturer document using P0317 was found; the description follows CARB and GM's rough-road sources in its misfire monitor.

Common Symptoms

  • Warning light (manufacturer-dependent)
  • Misfire readiness not set
  • Possibly false misfire codes on rough roads

Most Likely Root Causes

  • Module configuration does not match the equipment (after engine or ABS module replacement)
  • ABS/ESP module not responding (supply, CAN line)
  • Separate rough-road sensor missing or unplugged, where fitted
  • Engine module faulty

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside P0317.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Abs Module.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside P0317?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Abs Module.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Abs Module.
  5. 5Clear fault memory and run a verification cycle to confirm P0317 does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$30 – $272
Professional Repair (Parts + Labor)$86 – $648

Frequently Asked Questions

Is it safe to keep operating with fault code P0317?

Avoid prolonged operation until inspected to prevent secondary component damage.

How much does it cost to repair P0317?

DIY replacement parts average $30–$272, while professional service averages $86–$648.

Will resetting P0317 fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

P0317 fault code meaningP0317 repair costhow to fix P0317

Manufacturer & Technical Reference

OBD-II Technical Reference (Ignition & Misfire System)

Related Fault Codes

Auto & OBD-II →
P0317 Fault Code: Rough Road Hardware Not Present — Fixes & Cost | FaultCodes.org