# OBD-II P0317: Rough Road Hardware Not Present

> **Quick Answer:** OBD-II fault code P0317 indicates Rough Road Hardware Not Present. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $86–$648.

- **URL:** https://faultcodes.org/automotive/obd2-p0317
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Ignition & Misfire System
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Moderate (Intermediate)
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
Misfire detection works from crankshaft speed fluctuations, which rough roads also cause. CARB therefore allows misfire detection to pause on rough roads; many engines take a rough-road signal from the wheel speeds of the ABS module, a Ford patent describes such a detector. P0317 means the engine module is calibrated for an external rough-road signal but does not find the hardware: the supplying module does not respond on the data bus, or the configuration does not match the equipment – for example after replacing the engine or ABS module. Without the signal misfire detection cannot separate road bumps from misfires. No manufacturer document using P0317 was found; the description follows CARB and GM's rough-road sources in its misfire monitor.

## Common Symptoms
- Warning light (manufacturer-dependent)
- Misfire readiness not set
- Possibly false misfire codes on rough roads

## Most Likely Root Causes
- Module configuration does not match the equipment (after engine or ABS module replacement)
- ABS/ESP module not responding (supply, CAN line)
- Separate rough-road sensor missing or unplugged, where fitted
- Engine module faulty

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Abs Module.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Abs Module.
5. Clear fault memory and run a verification cycle to confirm P0317 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $30–$272 | $86–$648 |
| GBP | £24–£214 | £69–£516 |
| CAD | CA$41–CA$365 | CA$116–CA$870 |
| EUR | €28–€252 | €80–€600 |
| CHF | CHF 32–CHF 290 | CHF 106–CHF 792 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code P0317?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair P0317?
DIY replacement parts average $30–$272, while professional service averages $86–$648.

### Will resetting P0317 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

