FaultCodes.org
P0313OBD-IIIgnition & Misfire SystemTechnical Reference· Updated: Nov 22, 2026

P0313 Fault Code: Misfire Detected with Low Fuel

OBD-II P0313 (Ignition & Misfire System): Misfire Detected with Low Fuel.

Quick AnswerHigh — Service Soon

OBD-II fault code P0313 indicates Misfire Detected with Low Fuel. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $43–$648.

Safe to Operate?
No — Risk of Damage
DIY Difficulty
Easy (Basic Tools)
System
Ignition & Misfire System
Professional Repair
$43 – $648

What This Fault Code Means

When the tank is nearly empty the fuel pump can draw air in corners or on gradients, which causes misfires. CARB allows misfire detection to be switched off at 15 % fuel or less; some manufacturers instead report misfires detected in this state under P0313 rather than P030x. Ford's normal misfire monitor runs from 15 % fuel, Saab's ME9 from 12 %; Saab's T8 sets P0313 below 5 litres with the same tests as P0300 (3 % per 1,000 revolutions, flashing light at a catalyst-damaging rate). GM petrol engines simply suspend the monitor without their own code. After refuelling the symptoms usually disappear – if not, look for a real misfire cause.

Common Symptoms

  • Check engine light on (flashing at a catalyst-damaging rate)
  • Jerking or power loss with an almost empty tank, especially in corners or uphill
  • Usually no symptoms after refuelling

Most Likely Root Causes

  • Tank nearly empty – the fuel pump draws air (corners, gradients, braking)
  • Actual misfire cause (ignition, injector, false air) that happened at low fuel
  • Weak fuel pump, clogged strainer or filter, faulty swirl pot
  • Fuel level sender reading too low

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside P0313.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Fuel Pump.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside P0313?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Fuel Pump.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Fuel Pump.
  5. 5Clear fault memory and run a verification cycle to confirm P0313 does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$16 – $272
Professional Repair (Parts + Labor)$43 – $648

Frequently Asked Questions

Is it safe to keep operating with fault code P0313?

Avoid prolonged operation until inspected to prevent secondary component damage.

How much does it cost to repair P0313?

DIY replacement parts average $16–$272, while professional service averages $43–$648.

Will resetting P0313 fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

P0313 fault code meaningP0313 repair costhow to fix P0313

Manufacturer & Technical Reference

OBD-II Technical Reference (Ignition & Misfire System)

Related Fault Codes

Auto & OBD-II →
P0313 Fault Code: Misfire Detected with Low Fuel — Fixes & Cost | FaultCodes.org