FaultCodes.org
P012COBD-IIEngine Cooling & ThermostatTechnical Reference· Updated: Nov 22, 2026

P012C Fault Code: Turbocharger/Supercharger Inlet Pressure Sensor A Circuit Low

OBD-II P012C (Engine Cooling & Thermostat): Turbocharger/Supercharger Inlet Pressure Sensor A Circuit Low.

Quick AnswerHigh — Service Soon

OBD-II fault code P012C indicates Turbocharger/Supercharger Inlet Pressure Sensor A Circuit Low. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $43–$270.

Safe to Operate?
No — Risk of Damage
DIY Difficulty
Easy (Basic Tools)
System
Engine Cooling & Thermostat
Professional Repair
$43 – $270

What This Fault Code Means

The turbocharger/supercharger inlet pressure sensor A sits between the air filter and the compressor. The engine uses it for the compressor pressure ratio, to judge air filter restriction (ambient minus inlet pressure) and to cross-check the other pressure sensors. P012C means the signal voltage is below its lower limit – typically a signal wire shorted to ground, an open signal or 5 V reference wire, or a failed sensor. GM's supercharged V8 sets it below 3 % of the 5 V reference (about 0.15 V), with 320 of 400 samples failing, continuously monitored; two trips are normal, one in some 2019 applications. FCA documented false settings on the 2019 Jeep Wrangler 2.0 turbo that were cured by a software update. A substitute value is used and power may be limited.

Common Symptoms

  • Check engine light on
  • Often no noticeable symptoms
  • Power limitation possible

Most Likely Root Causes

  • Connector unplugged or corroded, signal or reference wire open
  • Signal wire shorted to ground
  • Sensor failed internally
  • Control module software (false setting)
  • 5 V reference shorted by another sensor

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside P012C.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Turbocharger Inlet Pressure Sensor A.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside P012C?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Turbocharger Inlet Pressure Sensor A.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Turbocharger Inlet Pressure Sensor A.
  5. 5Clear fault memory and run a verification cycle to confirm P012C does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$16 – $113
Professional Repair (Parts + Labor)$43 – $270

Frequently Asked Questions

Is it safe to keep operating with fault code P012C?

Avoid prolonged operation until inspected to prevent secondary component damage.

How much does it cost to repair P012C?

DIY replacement parts average $16–$113, while professional service averages $43–$270.

Will resetting P012C fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

P012C fault code meaningP012C repair costhow to fix P012C

Manufacturer & Technical Reference

OBD-II Technical Reference (Engine Cooling & Thermostat)

Related Fault Codes

Auto & OBD-II →
P012C Fault Code: Turbocharger/Supercharger Inlet… — Fixes & Cost | FaultCodes.org