FaultCodes.org
P011FOBD-IIEngine Cooling & ThermostatTechnical Reference· Updated: Nov 22, 2026

P011F Fault Code: Engine Coolant Temperature 2 / Ambient Air Temperature Correlation

OBD-II P011F (Engine Cooling & Thermostat): Engine Coolant Temperature 2 / Ambient Air Temperature Correlation.

Quick AnswerHigh — Service Soon

OBD-II fault code P011F indicates Engine Coolant Temperature 2 / Ambient Air Temperature Correlation. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $43–$216.

Safe to Operate?
No — Risk of Damage
DIY Difficulty
Easy (Basic Tools)
System
Engine Cooling & Thermostat
Professional Repair
$43 – $216

What This Fault Code Means

This is the counterpart of P011E for the second coolant temperature sensor and only exists on engines that have one – for example at the engine outlet, the radiator or in the heater circuit. After a long standstill sensor 2 should also read roughly the outside temperature; if it disagrees with the ambient sensor beyond a calibrated limit at start-up, P011F is set without saying which sensor is wrong. No manufacturer document using exactly this code was found; the description rests on CARB plus the cold-soak comparisons documented by Mazda (sensor 2 in the heater hose) and Ford under other codes.

Common Symptoms

  • Check engine light on
  • Usually no driving symptoms

Most Likely Root Causes

  • Coolant temperature sensor 2 drifting
  • Ambient temperature sensor faulty or influenced
  • Preheater or block heater
  • Contact resistance at sensor 2

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside P011F.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Engine Coolant Temperature Sensor 2.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside P011F?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Engine Coolant Temperature Sensor 2.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Engine Coolant Temperature Sensor 2.
  5. 5Clear fault memory and run a verification cycle to confirm P011F does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$16 – $91
Professional Repair (Parts + Labor)$43 – $216

Frequently Asked Questions

Is it safe to keep operating with fault code P011F?

Avoid prolonged operation until inspected to prevent secondary component damage.

How much does it cost to repair P011F?

DIY replacement parts average $16–$91, while professional service averages $43–$216.

Will resetting P011F fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

P011F fault code meaningP011F repair costhow to fix P011F

Manufacturer & Technical Reference

OBD-II Technical Reference (Engine Cooling & Thermostat)

Related Fault Codes

Auto & OBD-II →
P011F Fault Code: Engine Coolant Temperature 2 /… — Fixes & Cost | FaultCodes.org