# OBD-II P011F: Engine Coolant Temperature 2 / Ambient Air Temperature Correlation

> **Quick Answer:** OBD-II fault code P011F indicates Engine Coolant Temperature 2 / Ambient Air Temperature Correlation. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $43–$216.

- **URL:** https://faultcodes.org/automotive/obd2-p011f
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Engine Cooling & Thermostat
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Easy (Basic Tools)
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
This is the counterpart of P011E for the second coolant temperature sensor and only exists on engines that have one – for example at the engine outlet, the radiator or in the heater circuit. After a long standstill sensor 2 should also read roughly the outside temperature; if it disagrees with the ambient sensor beyond a calibrated limit at start-up, P011F is set without saying which sensor is wrong. No manufacturer document using exactly this code was found; the description rests on CARB plus the cold-soak comparisons documented by Mazda (sensor 2 in the heater hose) and Ford under other codes.

## Common Symptoms
- Check engine light on
- Usually no driving symptoms

## Most Likely Root Causes
- Coolant temperature sensor 2 drifting
- Ambient temperature sensor faulty or influenced
- Preheater or block heater
- Contact resistance at sensor 2

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Engine Coolant Temperature Sensor 2.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Engine Coolant Temperature Sensor 2.
5. Clear fault memory and run a verification cycle to confirm P011F does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $16–$91 | $43–$216 |
| GBP | £13–£71 | £34–£172 |
| CAD | CA$22–CA$122 | CA$58–CA$290 |
| EUR | €15–€84 | €40–€200 |
| CHF | CHF 17–CHF 97 | CHF 53–CHF 264 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code P011F?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair P011F?
DIY replacement parts average $16–$91, while professional service averages $43–$216.

### Will resetting P011F fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

