FaultCodes.org
P011DOBD-IIEngine Cooling & ThermostatTechnical Reference· Updated: Nov 22, 2026

P011D Fault Code: Charge Air Cooler Temperature/Intake Air Temperature Correlation Bank 2

OBD-II P011D (Engine Cooling & Thermostat): Charge Air Cooler Temperature/Intake Air Temperature Correlation Bank 2.

Quick AnswerHigh — Service Soon

OBD-II fault code P011D indicates Charge Air Cooler Temperature/Intake Air Temperature Correlation Bank 2. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $54–$378.

Safe to Operate?
No — Risk of Damage
DIY Difficulty
Moderate (Intermediate)
System
Engine Cooling & Thermostat
Professional Repair
$54 – $378

What This Fault Code Means

This is the bank 2 counterpart of P011C and only exists on engines with two separate intake paths, each with its own charge air cooler temperature sensor and intake air temperature sensor – for example V engines with twin turbochargers and separate charge air coolers. After a long standstill both bank 2 sensors should read nearly the same; if they disagree at start-up, without either showing a circuit fault, P011D is set. The code does not identify which sensor is wrong. No manufacturer document using exactly this code was found; the check follows the same principle Ford uses for bank 1 after 6 hours, with a preheater suspending it.

Common Symptoms

  • Check engine light on
  • Usually no change in driving
  • Code often returns only after an overnight soak

Most Likely Root Causes

  • Bank 2 charge air cooler temperature sensor drifting, oily or stuck
  • Bank 2 intake air temperature sensor drifting
  • Contact resistance at connector or ground
  • Undetected preheating or uneven cooling

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside P011D.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Charge Air Cooler Temperature Sensor Bank2.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside P011D?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Charge Air Cooler Temperature Sensor Bank2.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Charge Air Cooler Temperature Sensor Bank2.
  5. 5Clear fault memory and run a verification cycle to confirm P011D does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$19 – $159
Professional Repair (Parts + Labor)$54 – $378

Frequently Asked Questions

Is it safe to keep operating with fault code P011D?

Avoid prolonged operation until inspected to prevent secondary component damage.

How much does it cost to repair P011D?

DIY replacement parts average $19–$159, while professional service averages $54–$378.

Will resetting P011D fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

P011D fault code meaningP011D repair costhow to fix P011D

Manufacturer & Technical Reference

OBD-II Technical Reference (Engine Cooling & Thermostat)

Related Fault Codes

Auto & OBD-II →
P011D Fault Code: Charge Air Cooler… — Fixes & Cost | FaultCodes.org