FaultCodes.org
P011COBD-IIEngine Cooling & ThermostatTechnical Reference· Updated: Nov 22, 2026

P011C Fault Code: Charge Air Cooler Temperature/Intake Air Temperature Correlation Bank 1

OBD-II P011C (Engine Cooling & Thermostat): Charge Air Cooler Temperature/Intake Air Temperature Correlation Bank 1.

Quick AnswerHigh — Service Soon

OBD-II fault code P011C indicates Charge Air Cooler Temperature/Intake Air Temperature Correlation Bank 1. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $54–$324.

Safe to Operate?
No — Risk of Damage
DIY Difficulty
Easy (Basic Tools)
System
Engine Cooling & Thermostat
Professional Repair
$54 – $324

What This Fault Code Means

On turbocharged engines a charge air cooler temperature sensor sits downstream of the compressor, usually after the charge air cooler, and intake air temperature sensor 1 sits upstream near the air filter. While driving they differ by design, because compression heats the air. After a long standstill, however, both should read nearly the same, so the check runs at start-up. P011C is set when the two bank 1 sensors disagree there, without naming the faulty one. No manufacturer document using exactly this code was found; Ford performs the same comparison after 6 hours (tolerance about 17 °C on petrol, 16 °C on the 2023 diesel) but reports the outlier as P007B, P0111 or P00CE.

Common Symptoms

  • Check engine light on
  • Usually no change in driving
  • Code often returns only after an overnight soak

Most Likely Root Causes

  • Charge air cooler temperature sensor drifting, oily or stuck
  • Intake air temperature sensor 1 drifting
  • Contact resistance at connector or shared ground
  • Undetected preheating or uneven cooling (sun, residual heat)

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside P011C.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Charge Air Cooler Temperature Sensor.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside P011C?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Charge Air Cooler Temperature Sensor.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Charge Air Cooler Temperature Sensor.
  5. 5Clear fault memory and run a verification cycle to confirm P011C does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$19 – $136
Professional Repair (Parts + Labor)$54 – $324

Frequently Asked Questions

Is it safe to keep operating with fault code P011C?

Avoid prolonged operation until inspected to prevent secondary component damage.

How much does it cost to repair P011C?

DIY replacement parts average $19–$136, while professional service averages $54–$324.

Will resetting P011C fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

P011C fault code meaningP011C repair costhow to fix P011C

Manufacturer & Technical Reference

OBD-II Technical Reference (Engine Cooling & Thermostat)

Related Fault Codes

Auto & OBD-II →
P011C Fault Code: Charge Air Cooler… — Fixes & Cost | FaultCodes.org