FaultCodes.org
P010AOBD-IIFuel Trim & Air/O2 MeteringTechnical Reference· Updated: Nov 22, 2026

P010A Fault Code: Mass or Volume Air Flow Sensor B Circuit

OBD-II P010A (Fuel Trim & Air/O2 Metering): Mass or Volume Air Flow Sensor B Circuit.

Quick AnswerHigh — Service Soon

OBD-II fault code P010A indicates Mass or Volume Air Flow Sensor B Circuit. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $43–$378.

Safe to Operate?
No — Risk of Damage
DIY Difficulty
Easy (Basic Tools)
System
Fuel Trim & Air/O2 Metering
Professional Repair
$43 – $378

What This Fault Code Means

Sensor B is a second mass air flow sensor in a second intake path, found on engines with two air filter boxes – for example the Nissan VR30DDTT twin-turbo V6 (where sensor B belongs to bank 2) or GM's 3.0 litre twin-turbo V6. P010A is the general circuit fault of sensor B: no usable signal at all, just like P0100 for sensor A. Ford's 2020–2023 petrol summary lists it for a broken element of digital sensor B, with the same limit as sensor A (period above 1.3 ms for half a second); which engines carry sensor B is not stated. GM's twin-turbo V6 only uses the other sensor B codes. The engine can run on values calculated from manifold pressure, throttle and the remaining sensor.

Common Symptoms

  • Check engine light on
  • Lack of power, hesitation (substitute value)
  • Rough idle
  • Start-stop may be disabled

Most Likely Root Causes

  • Connector or wiring of sensor B open
  • Sensor B faulty internally (broken element)
  • Supply of sensor B missing (fuse, relay)
  • Control module input faulty

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside P010A.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Mass Air Flow Sensor B.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside P010A?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Mass Air Flow Sensor B.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Mass Air Flow Sensor B.
  5. 5Clear fault memory and run a verification cycle to confirm P010A does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$16 – $159
Professional Repair (Parts + Labor)$43 – $378

Frequently Asked Questions

Is it safe to keep operating with fault code P010A?

Avoid prolonged operation until inspected to prevent secondary component damage.

How much does it cost to repair P010A?

DIY replacement parts average $16–$159, while professional service averages $43–$378.

Will resetting P010A fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

P010A fault code meaningP010A repair costhow to fix P010A

Manufacturer & Technical Reference

OBD-II Technical Reference (Fuel Trim & Air/O2 Metering)

Related Fault Codes

Auto & OBD-II →
P010A Fault Code: Mass or Volume Air Flow Sensor B Circuit | FaultCodes.org