C0048 Fault Code: Brake Booster Travel Sensor
OBD-II C0048 (Chassis, ABS & Stability Control): Brake Booster Travel Sensor.
OBD-II fault code C0048 indicates Brake Booster Travel Sensor. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $216–$2160.
- Safe to Operate?
- No — Risk of Damage
- DIY Difficulty
- Professional Recommended
- System
- Chassis, ABS & Stability Control
- Professional Repair
- $216 – $2,160
What This Fault Code Means
Covers the travel (position) sensor of the power brake booster or brake actuation unit, which reports how far the booster input rod or piston has moved so the module can match assist to driver demand. The module monitors the sensor for a signal outside the valid range, an open or short and a position that is implausible against pedal position or boost pressure. It complements the booster pressure sensor C0047: travel gives displacement while pressure gives force, and together they let the module close the assist loop in electronic and brake-by-wire boosters. A fault reduces or disables controlled assist, changes pedal feel and sets the brake or ABS warning lamp while base braking remains. Patents describe an electrical travel sensor that tracks the moving wall inside a vacuum booster. No manufacturer documents this code publicly.
Common Symptoms
- Changed brake pedal feel
- Reduced or inconsistent brake assist
- ABS or brake warning lamp on
Most Likely Root Causes
- Travel sensor out of range or failed
- Binding or worn booster mechanism
- Harness or connector fault
Diagnostic Checks Before Replacing Parts
Verify the exact faulty component before ordering replacements.
- 1Read stored freeze-frame data and companion codes alongside C0048.
- 2Inspect electrical connectors, fuses, and harnesses connected to Brake Booster Travel Sensor.
- 3Verify live sensor telemetry before ordering replacement components.
Interactive Symptom Triage
Answer 3 quick checks to narrow down the faulty component before spending money on parts.
Are any companion fault codes stored alongside C0048?
Step-by-Step Troubleshooting & Fix
- 1Scan for companion fault codes and address upstream circuit issues first.
- 2Visually inspect wiring harnesses, plugs, and hoses around Brake Booster Travel Sensor.
- 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
- 4Repair damaged wiring or install an OEM-grade replacement Brake Booster Travel Sensor.
- 5Clear fault memory and run a verification cycle to confirm C0048 does not return.
Estimated Repair Cost Benchmark
Typical DIY parts and certified technician labor ranges. Select a currency below.
| Repair Path | USD |
|---|---|
| DIY Parts Only | $76 – $907 |
| Professional Repair (Parts + Labor) | $216 – $2,160 |
Certified Technician Service Checklist
This fault involves sealed safety, gas, or high-voltage systems. Share these details when requesting a repair quote.
- Share exact brand & fault code: C0048 (Chassis, ABS & Stability Control)
- Record appliance/boiler serial, model plate, or pressure reading before calling
- Typical certified technician range: $216 – $2,160
Frequently Asked Questions
Is it safe to keep operating with fault code C0048?
Avoid prolonged operation until inspected to prevent secondary component damage.
How much does it cost to repair C0048?
DIY replacement parts average $76–$907, while professional service averages $216–$2160.
Will resetting C0048 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.
Related Searches & Questions
Manufacturer & Technical Reference
OBD-II Technical Reference (Chassis, ABS & Stability Control)