# OBD-II C0048: Brake Booster Travel Sensor

> **Quick Answer:** OBD-II fault code C0048 indicates Brake Booster Travel Sensor. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $216–$2160.

- **URL:** https://faultcodes.org/automotive/obd2-c0048
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Chassis, ABS & Stability Control
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
Covers the travel (position) sensor of the power brake booster or brake actuation unit, which reports how far the booster input rod or piston has moved so the module can match assist to driver demand. The module monitors the sensor for a signal outside the valid range, an open or short and a position that is implausible against pedal position or boost pressure. It complements the booster pressure sensor C0047: travel gives displacement while pressure gives force, and together they let the module close the assist loop in electronic and brake-by-wire boosters. A fault reduces or disables controlled assist, changes pedal feel and sets the brake or ABS warning lamp while base braking remains. Patents describe an electrical travel sensor that tracks the moving wall inside a vacuum booster. No manufacturer documents this code publicly.

## Common Symptoms
- Changed brake pedal feel
- Reduced or inconsistent brake assist
- ABS or brake warning lamp on

## Most Likely Root Causes
- Travel sensor out of range or failed
- Binding or worn booster mechanism
- Harness or connector fault

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Brake Booster Travel Sensor.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Brake Booster Travel Sensor.
5. Clear fault memory and run a verification cycle to confirm C0048 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $76–$907 | $216–$2160 |
| GBP | £60–£714 | £172–£1720 |
| CAD | CA$102–CA$1218 | CA$290–CA$2900 |
| EUR | €70–€840 | €200–€2000 |
| CHF | CHF 81–CHF 966 | CHF 264–CHF 2640 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code C0048?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair C0048?
DIY replacement parts average $76–$907, while professional service averages $216–$2160.

### Will resetting C0048 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

