FaultCodes.org
C0047OBD-IIChassis, ABS & Stability ControlTechnical Reference· Updated: Nov 22, 2026

C0047 Fault Code: Brake Booster Pressure Sensor

OBD-II C0047 (Chassis, ABS & Stability Control): Brake Booster Pressure Sensor.

Quick AnswerHigh — Service Soon

OBD-II fault code C0047 indicates Brake Booster Pressure Sensor. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $216–$2160.

Safe to Operate?
No — Risk of Damage
DIY Difficulty
Professional Recommended
System
Chassis, ABS & Stability Control
Professional Repair
$216 – $2,160

What This Fault Code Means

Covers the pressure sensor in the power brake booster or brake actuation unit, which measures boost or assist pressure so the module can regulate assist and detect loss of boost. The module monitors the sensor for a signal outside the valid range, an open or short and values that disagree with pedal demand or master-cylinder pressure. Ford documents C0047:64 on 2020 Explorer and Lincoln Aviator, where it is stored in the ABS module with a noticeable loss of power brake assist or a soft, long brake pedal just after start-up. A fault reduces or disables controlled assist and sets the brake or ABS warning lamp; the driver may feel a harder, longer pedal until assist is restored.

Common Symptoms

  • Lack of power brake assist
  • Soft or extended pedal at start-up
  • ABS or brake warning lamp on

Most Likely Root Causes

  • Booster pressure sensor out of range
  • Module calibration or software issue
  • Harness or connector fault

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside C0047.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Brake Booster Pressure Sensor.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside C0047?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Brake Booster Pressure Sensor.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Brake Booster Pressure Sensor.
  5. 5Clear fault memory and run a verification cycle to confirm C0047 does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$76 – $907
Professional Repair (Parts + Labor)$216 – $2,160

Certified Technician Service Checklist

This fault involves sealed safety, gas, or high-voltage systems. Share these details when requesting a repair quote.

  • Share exact brand & fault code: C0047 (Chassis, ABS & Stability Control)
  • Record appliance/boiler serial, model plate, or pressure reading before calling
  • Typical certified technician range: $216 – $2,160

Frequently Asked Questions

Is it safe to keep operating with fault code C0047?

Avoid prolonged operation until inspected to prevent secondary component damage.

How much does it cost to repair C0047?

DIY replacement parts average $76–$907, while professional service averages $216–$2160.

Will resetting C0047 fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

C0047 fault code meaningC0047 repair costhow to fix C0047

Manufacturer & Technical Reference

OBD-II Technical Reference (Chassis, ABS & Stability Control)

Related Fault Codes

Auto & OBD-II →
C0047 Fault Code: Brake Booster Pressure Sensor — Fixes & Cost | FaultCodes.org