# OBD-II C0047: Brake Booster Pressure Sensor

> **Quick Answer:** OBD-II fault code C0047 indicates Brake Booster Pressure Sensor. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $216–$2160.

- **URL:** https://faultcodes.org/automotive/obd2-c0047
- **Category:** Automotive & OBD-II
- **Brand / Standard:** OBD-II
- **System Area:** Chassis, ABS & Stability Control
- **Severity:** High — Service Soon
- **Safe to Operate?:** No — Risk of Damage
- **DIY Difficulty:** Professional Recommended
- **Updated:** 2026-11-22T05:56:37+00:00

## What This Fault Code Means
Covers the pressure sensor in the power brake booster or brake actuation unit, which measures boost or assist pressure so the module can regulate assist and detect loss of boost. The module monitors the sensor for a signal outside the valid range, an open or short and values that disagree with pedal demand or master-cylinder pressure. Ford documents C0047:64 on 2020 Explorer and Lincoln Aviator, where it is stored in the ABS module with a noticeable loss of power brake assist or a soft, long brake pedal just after start-up. A fault reduces or disables controlled assist and sets the brake or ABS warning lamp; the driver may feel a harder, longer pedal until assist is restored.

## Common Symptoms
- Lack of power brake assist
- Soft or extended pedal at start-up
- ABS or brake warning lamp on

## Most Likely Root Causes
- Booster pressure sensor out of range
- Module calibration or software issue
- Harness or connector fault

## Step-by-Step Troubleshooting & Fix
1. Scan for companion fault codes and address upstream circuit issues first.
2. Visually inspect wiring harnesses, plugs, and hoses around Brake Booster Pressure Sensor.
3. Test component voltage, resistance, or mechanical actuation with diagnostic tools.
4. Repair damaged wiring or install an OEM-grade replacement Brake Booster Pressure Sensor.
5. Clear fault memory and run a verification cycle to confirm C0047 does not return.

## Estimated Repair Cost Benchmark
| Currency | DIY Parts Only | Professional Repair (Parts + Labor) |
| --- | --- | --- |
| USD | $76–$907 | $216–$2160 |
| GBP | £60–£714 | £172–£1720 |
| CAD | CA$102–CA$1218 | CA$290–CA$2900 |
| EUR | €70–€840 | €200–€2000 |
| CHF | CHF 81–CHF 966 | CHF 264–CHF 2640 |

## Frequently Asked Questions
### Is it safe to keep operating with fault code C0047?
Avoid prolonged operation until inspected to prevent secondary component damage.

### How much does it cost to repair C0047?
DIY replacement parts average $76–$907, while professional service averages $216–$2160.

### Will resetting C0047 fix the problem permanently?
No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

