FaultCodes.org
C0046OBD-IIChassis, ABS & Stability ControlTechnical Reference· Updated: Nov 22, 2026

C0046 Fault Code: Brake Pressure Sensor A/B

OBD-II C0046 (Chassis, ABS & Stability Control): Brake Pressure Sensor A/B.

Quick AnswerHigh — Service Soon

OBD-II fault code C0046 indicates Brake Pressure Sensor A/B. Avoid prolonged operation until inspected to prevent secondary component damage. Typical professional repair costs $432–$2376.

Safe to Operate?
No — Risk of Damage
DIY Difficulty
Professional Recommended
System
Chassis, ABS & Stability Control
Professional Repair
$432 – $2,376

What This Fault Code Means

A correlation code for the pair of brake pressure sensors A and B, set when their readings do not agree within the expected tolerance. Where C0044 and C0045 flag a single-sensor electrical fault, this code is a plausibility fault: at the same instant both sensors should report consistent pressure (allowing for their known relationship), and a persistent mismatch indicates one sensor has drifted, a hydraulic fault separates the circuits, or a signal is corrupted. The stability and brake modules rely on agreement to trust the pressure reading for stability, brake assist and brake-by-wire control. A fault disables those functions and sets the ABS or brake warning lamp while base braking remains. NHTSA lists C0046 in the J2012 table of its EPS report. No manufacturer documents it publicly.

Common Symptoms

  • ABS or brake warning lamp on
  • Stability and assist functions disabled
  • Changed brake assist behaviour

Most Likely Root Causes

  • One pressure sensor drifted or biased
  • Hydraulic fault separating the circuits
  • Signal corruption or wiring fault

Diagnostic Checks Before Replacing Parts

Verify the exact faulty component before ordering replacements.

  1. 1Read stored freeze-frame data and companion codes alongside C0046.
  2. 2Inspect electrical connectors, fuses, and harnesses connected to Brake Pressure Sensors.
  3. 3Verify live sensor telemetry before ordering replacement components.

Interactive Symptom Triage

Answer 3 quick checks to narrow down the faulty component before spending money on parts.

Check 1 of 3

Are any companion fault codes stored alongside C0046?

Step-by-Step Troubleshooting & Fix

  1. 1Scan for companion fault codes and address upstream circuit issues first.
  2. 2Visually inspect wiring harnesses, plugs, and hoses around Brake Pressure Sensors.
  3. 3Test component voltage, resistance, or mechanical actuation with diagnostic tools.
  4. 4Repair damaged wiring or install an OEM-grade replacement Brake Pressure Sensors.
  5. 5Clear fault memory and run a verification cycle to confirm C0046 does not return.

Estimated Repair Cost Benchmark

Typical DIY parts and certified technician labor ranges. Select a currency below.

Currency:
Repair PathUSD
DIY Parts Only$151 – $998
Professional Repair (Parts + Labor)$432 – $2,376

Certified Technician Service Checklist

This fault involves sealed safety, gas, or high-voltage systems. Share these details when requesting a repair quote.

  • Share exact brand & fault code: C0046 (Chassis, ABS & Stability Control)
  • Record appliance/boiler serial, model plate, or pressure reading before calling
  • Typical certified technician range: $432 – $2,376

Frequently Asked Questions

Is it safe to keep operating with fault code C0046?

Avoid prolonged operation until inspected to prevent secondary component damage.

How much does it cost to repair C0046?

DIY replacement parts average $151–$998, while professional service averages $432–$2376.

Will resetting C0046 fix the problem permanently?

No. Clearing the fault code only removes the stored alert temporarily; the code returns if the underlying fault persists.

Related Searches & Questions

C0046 fault code meaningC0046 repair costhow to fix C0046

Manufacturer & Technical Reference

OBD-II Technical Reference (Chassis, ABS & Stability Control)

Related Fault Codes

Auto & OBD-II →
C0046 Fault Code: Brake Pressure Sensor A/B — Causes, Fixes & Cost | FaultCodes.org